|
[China]
Trade Verify
Address: 2301, Building 1, Fortune Plaza, No.2177, Tianchen Road,Gaoxin District, Jinan, Shandong,China.
Contact name:Gaven
Jinan Auten Machinery Co., Ltd. |
|
Verified Suppliers
|
|
|
Gantry Type CNC H Beam Drilling Machine Specialized For Large Section Beams
INTRODUCTION
BD2010 which was designed for large-section beam fabricators desiring to increase profitability and throughput (tons-per-month) in today’s extremely competitive market. BD2010 eliminates time-consuming manual beam layout and hole drilling, formerly done by mag drills and/or hydraulic punches.
BD2010 is equipped with 3 self-supported high-speed Y-Z-axis moving drilling spindles. All spindles are built on the gantry and moving along with it. The spindle can provide high efficient drilling capacity with wide range of hole diameters. All these 3 drilling units can work simultaneously on the web and flanges of the beam. The Beam is fixed on the worktable, and the gantry will finish the CNC moving automatically to find the right position for drilling.
BD2010 can be multi-used for drilling H-Beam, Box-Beam, Column-Beam and Channel. The high speed drilling spindle and high speed position servo system will enable the machine to finish job efficiently.
MACHINE MAIN CHARACTER
SPECIFICATIONS:
Operating Range
| H-Beam | 1000 x 400 mm ~ 2000 x 1000 mm |
| Channel | 1000 x 400 mm ~ 2000 x 1000 mm |
| Box-Beam & Column Beam | 1000 x 400 mm ~ 2000 x 1000 mm |
| Max. Length of Workpiece | 12,000 mm |
| Max. Loading Capacity | 3 tons/m, total 35 Tons/whole worktable |
Drilling Unit
| No. of Drilling Spindle | 3 (Left + Right + Top) |
| Drilling Diameter | Φ12.5 ~ Φ50 mm |
| Thread Tapping | 4# |
| Motor Power of Drilling Spindle | 5.5 kW x 3 |
| Spindle Feeding Stoke | Y1 axis: 1000mm; A axis: 600mm (horizontal) Y2 axis: 1000mm; B axis: 600mm (horizontal) Z axis: 2000mm; C axis: 600mm (vertical) |
| Spindle Y & Z movement | Yes |
| Feed | CNC feeding; 0 ~10 m/min (vertical to H-beam) |
| Drilling Tools & Tool Lube Model | Coated Drill Bit with mist spray cooling Or Carbide Drill Bit with inner cooling |
| Spindle rpm (servo) | Stepless120~560 rpm |
| Profile Height Measuring | Included |
| Profile Width Measuring | Included |
| Layout Point Marking (not drilling through) | Available (for welding purpose) |
Gantry System
| Moving Speed | 0 ~ 10m/min |
| Drive Model | Double side servo + Gear |
| Structure | Square Pipe + Plate; HF welded |
Control System
| Type | Computer + Mitsubishi PLC + Modules |
| Importing Software | AUTOCAD (*.dxf), TEKLA, X-STEEL (*.nc1, dstv) |
| Manual Programming | Available |
Hydraulic System (for tool changing & side push aligning)
| Hydraulic Motor Power | 5.5 kW |
| System Inner Working Pressure | 75 bar |
| Flux | 40 L/min. |
| Hydraulic Tank Content | 140 L |
| Hydraulic oil N0. | #46 |
Scraps Removal System
| Motor Power | 1.5 kW |
| Type | Chain & Plate recycling moving type |
| Speed | 10/min |
| No. of scraps removal system | 2sets |
Machine overall info
| Dimension (L x W x H) | L 17000mm x W 8600mm x H 4620mm |
| Total Weight | Around 50 Tons |
| Total Power | 40 kW |
Main Machine Body (Gantry and Working table)
Material Support and Side-push Device
High-speed Drilling Spindle
Workpiece showing
