|
[China]
Trade Verify
Address: No.36 Qingxi Road,Guankou Town,Jimei District Xiamen City,Fujian Province,China
Contact name:IvyDeng
Xiamen DingZhu Intelligent Equipment Co.,Ltd |
|
Verified Suppliers
|
|
|
| 1-Manipulator Low Pressure Die Casting Machine Technical Parameters | ||
| Code | Item | Specifications |
| 1 | Dimensions ( L*W*H) | 5000*4600* 3400 |
| 2 | Machine Power | 125KW |
| 3 | Rated Voltage | 380V |
| 4 | Manipulator Quantity | 1 |
| 5 | Maximum Weight of Die | 180KG |
| 6 | Maximum Dimension of Die | 500*400*250 |
| 7 | Furnace Power | 3*35KW |
| 8 | Furnace Melting Capacity | 350Kg |
| 9 | Furnace Quantity | 1 |
| 10 | Die Cleaning Box Quantity | 1 |
| 11 | Feeder Quantity | 1 |
| 12 | Blackwash Tank Quantity | 1 |
| 13 | Hoist Quantity | 1 |
| 14 | Lift Tube Quantity | 3 |
| 15 | Pneumatic Pressure | 6KG |
| 16 | Water Pressure | 3KG |
| 17 | Maximum Furnace Temperature | 1250℃ |
| 18 | Cooling Water Temperature | 20±2℃ |
| 19 | Maximum Speed of Manipulator | 20m/ Min. |
| 20 | Maximum Die Clamping Stroke | 370mm |
| 21 | Die Bath Angle | 0-90º |
| 22 | Ejector Pin Pressure | 540KG |
| 23 | Ejector Pin Stroke | 40mm |
| 24 | Pouring Pressure | 50-1200bar |
| 25 | Maximum Lift Weight of Hoist | 500kg |
2- Manipulators Low Pressure Die Casting Machine Technical Parameters | ||
Code | Item | Specifications |
| 1 | Dimension ( L*W*H) | 7000*7000*3680 |
| 2 | Machine Power | 180KW |
| 3 | Rated Voltage | 380V |
| 4 | Manipulator Quantity | 2 |
| 5 | Maximum Weight of Die | 180KG |
| 6 | Maximum Dimension of Die | 500*400*250 |
| 7 | Furnace Power | 2*80KW |
| 8 | Furnace Melting Capacity | 520Kg |
| 9 | Furnace Quantity | 1 |
| 10 | Die Cleaning Box Quantity | 1 |
| 11 | Feeder Quantity | 1 |
| 12 | Blackwash Tank Quantity | 1 |
| 13 | Hoist Quantity | 1 |
| 14 | Lift Tube Quantity | 2 |
| 15 | Pneumatic Pressure | 6KG |
| 16 | Water Pressure | 3KG |
| 17 | Maximum Furnace Temperature | 1250℃ |
| 18 | Cooling Water Temperature | 20±2℃ |
| 19 | Maximum Speed of Manipulator | 9R/Min. |
| 20 | Maximum Die Clamping Stroke | 370mm |
| 21 | Die Bath Angle | 0-90º |
| 22 | Ejector Pin Pressure | 540KG |
| 23 | Ejector Pin Stroke | 40mm |
| 24 | Pouring Pressure | 50-1200bar |
| 25 | Maximum Lift Weight of Hoist | 500kg |
1. Manipulators:
1.1 Two manipulators operated independantly;
1.2 Operating Parameters can be edited independently;
1.3 Two manipulators either work at the same time; or one set changes die the other set under maintenance.
2. Different die castings are equipped with sperated feeders, graphite baths and manipulators.
3. Large furnace melting rate, capacity is up to 520KG/Hr, satisfy 2 manipulators working together.
4. Drived by servo motor, with high precised, stable and efficiency performance.
