Dongguan Lizhun machinery Co., LTD |
Verified Suppliers
|
|
High Speed CNC Drilling and Tapping Machine Center TV-650 High
Precision
TV-650 is a high precision, high speed, high rigidity CNC drilling
and tapping machine center. The base and other main structures of the machine are made of high
quality materials to ensure high rigidity and stability of the
overall structure of the machine. The motor has high efficiency, the fast acceleration and
deceleration of the motor can effectively reduce the backlash
problem and improve the tapping speed and quality. The machine also uses a low inertia spindle motor, the acceleration time is short,
achieving 0-12000RPM only takes one second. The TV-650 is also
using the TIDD heat source barrier spindle drive system. This
system can effectively block the motor heat conduction to the
spindle, can greatly reduce the thermal elongation of the
spindle, improve efficiency and prolong service life.
Main Technical Parameters
ITEM | MODELS | TV650 |
WORKTABLE (WIDTH*LENGTH) | mm | 700*420 |
DISTANCE BETWEEN T SLOTS | mm | 4*14*100 |
MAX LOAD BEARING OF WORKTABLE | kg | 250 |
X/Y/Z AXIS TRAVEL | mm | 600/450/400 |
DISTANCE FROM SPINDLE NOSE TOWORKBENCH | mm | 130-530 |
SPINDLE HOLE TAPER | BT30 | |
SPINDLE SPEED RANGE | r/min | 12000 |
TRANSMISSION OF SPINDLE BOX | BELT/DIRECT | Optional |
SPINDLE MOTOR POWER | kW | 3.7/5.5( Mitsubishi)/5.5/7.5(Fanuc |
X/Y/Z RAPID FEED SPEED | m/min | 48/48/60(60/60/60) |
MAX CUTTING FEED SPEED | mm/min | 1-20000 |
TOOLS MAGAZINE CAPACITY | pcs | 14(Standard)16/18/21(Optional) |
FULL TOOLS MAX TOOL DIAMETER | mm | ∅80/∅120 |
MAX.TOOLS ALLOWABLE WEIGHT | kg | 3.5 |
MAX.TOOLS ALLOWABLE LENGTH | mm | 200 |
TOOL CHANGE TIME | sec | 1.8 |
COOLING PUMP FLOW RATE | L/min | 200 |
X/Y/Z POSITION ACCURACY | mm | ±0.005 |
X/Y/Z RE-POSITION ACCURACY | mm | ±0.003 |
CONTROL SYSTEM | Mitsubishi, Siemens, Fanuc | |
SPINDLE BRAND | ROYAL, Taida, VYU CHENG | |
BALLSCREW BRAND | Taiwan, Hiwin, PMI | |
TOOL MAGAZINE BRAND | Taiwan | |
HEAT EXCHANGER BRAND | Rucol | |
MACHINE DIMENSION | mm | 1700*2015*2300 |
MACHINE WEIGHT | kg | 1500 |
Air source/pressure | kg/cm2 | 7 |
Full Cover shield / Self-lubrication system / Working lights /
Warning lights / Working condition warning lights / Self-powered
electrical shutoff system / Clean air gun/ Water Tank / Transformer
/ Spindle air curtain and dust control system / Rigid
Tapping / Worktable cleaning water gun
Optional Configuration TV Series
NC rotary table (4 Axis) / CTS / Tool detection system / Automatic
tool length measurement and damage detection / 3 Axis Linear
Scale / Disc type oil-water separator / Crawler chips
remover / Direct connection spindle / Spindle oil cooler