|
[China]
Trade Verify
Address: Building 8, No. 12, Zhicheng Road, Songshan Lake Park, Songshan Lake Management Committee, Dongguan City, China
Contact name:Michelle Liu
Dongguan Lizhun machinery Co., LTD |
|
Verified Suppliers
|
|
|
The VMC855 is one of the products in the VMC series. This model is an upgrade of VMC850. Compared with VMC850, VMC855 has a larger size of worktable, which can better process large and complex parts. The 5 Axis CNC Vertical Machining Center VMC 855 has a high strength construction and Integrated bearing block, which can effectively improve the overall rigidity of the axial system and effectively avoid the rotation deformation of the screw. It is also using the oil-water separation design, which can not only prolong the service life of the chip fluid, but also reduce the cost and meet the requirements of environmental protection requirement. The three-axis lead screw adopts the installation method of fixed two ends, and with large high precision ball screw, the best speed response and positioning accuracy can be obtained by pre-stretching treatment.
| ITEM | MODELS→ | VMC855 |
| WORKTABLE (WIDTH*LENGTH) | mm | 550*1000 |
| DISTANCE BETWEEN T SLOTS | mm | 5-18*100 |
| MAX LOAD BEARING OF WORKTABLE | kg | 600 |
| X/Y/Z AXIS TRAVEL | mm | 800/550/600 |
| 5-AXIS | / | |
| DISTANCE FROM SPINDLE NOSE TOWORKBENCH | mm | 110-810/110-610 |
| SPINDLE HOLE TAPER | BT40 | |
| SPINDLE SPEED RANGE | r/min | 10000 |
| TRANSMISSION OF SPINDLE BOX | BELT/DIRECT | BELT/DIRECT |
| SPINDLE MOTOR POWER | kW | 7.5 |
| X/Y/Z RAPID FEED SPEED | m/min | 36*36*24 |
| MAX CUTTING FEED SPEED | mm/min | 10000 |
| TOOLS MAGAZINE CAPACITY | pcs | 24 |
| FULL TOOLS MAX TOOL DIAMETER | mm | 100 |
| MAX.TOOLS ALLOWABLE WEIGHT | kg | 7 |
| MAX.TOOLS ALLOWABLE LENGTH | mm | 260 |
| X/Y/Z POSITION ACCURACY | mm | 0.008 |
| X/Y/Z RE-POSITION ACCURACY | mm | 0.005 |
| MACHINE DIMENSION | mm | 2495*1970 |
| MACHINE WEIGHT | kg | 6000 |
Full Cover shield / Self-lubrication system / Working lights / Warning lights / Working condition warning lights / Self-powered electrical shutoff system / Clean air gun/ Water Tank / Transformer / Spindle air curtain and dust control system / 10000 RPM spindle / Worktable cleaning water gun
24 disc manipulator tool magazine / Crawler chips remover / NC rotary table (4 Axis) / CTS / Tool detection system / AJO / 12000 & 15000 RPM Direct connection spindle / Oil mist purifier
