Henan WadJay Machinery Co.Ltd |
|
Zinc Ridge Cap Roll Forming Machine Metal Roofing Ridge Tiles Making Machinery
Roll forming system
Rollers: design by senior engineers with Auto-cad software,
manufactured with 45# high grade steel by CNC machine tools and
coated with hard chrome;
Shaft: manufactured with 45# high grade steel by CNC machine tools;
Supporting frame: steel wallboard to guide the forming station
bearing basement
Hydraulic station
It is controlled by gear wheel oil pump. After filling the
hydraulic oil into the hydraulic oil tank, the pump drive the
cutter machine to begin the cutting job.
Match equipment: The system includes a set of hydraulic tank , a
set of hydraulic oil pump, two hydraulic pipes.and two sets of
electromagnetism valves.
Adopted top brand hydraulic system components to ensure the
stability and lifetime, avoid leakage.
Supplies the initial power to the cuter through a closed oil tank.
It is off without cutting, which can save the power.
Electric control system
Automatic length measurement: one unit tooling of length measuring
which is lightly pressed on the surface of the steel sheet; the
tolling will roll with the moving speed of the steel sheet and then
sense to measure its length; length inaccuracy can be amended
easily.
Automatic quantity measurement;
PLC is used to control length & quantity. Machine will
automatically cut to length and stop when required quantity is
achieved;
Control panel: Button-type switch, LED display length and quantity
;
Unit of length: millimeter;
Motor Over-Load, System Over-Current, Short circuit Protection
function;
Display total length and total quantity produced
Material Thickness | 0.3-0.8mm |
Roller Material | No.45 forged steel |
Forming Speed | About 13-15m/min |
Output Speed | 3-6m/min |
Speed Adjusting Mode | AC frequency |
Roller Drive | Decelerating motor+Chain Drive |
Cutting Mode | Hydraulic Cutting |
Cutter Material | Cr12 mould steel |
Length Measurement | Encoder |
Control Mode | Panasonic or Delta PLC |
Operating Mode | Button +Panasonic/Delta Touch screen |
Main Motor | 5.5KW |
Hydraulic station motor | 4KW |