Product Description
he Door Frame Metal production line includes manual decoiler,feeding device,leveling
device,puchiing device,incising device,main roll forming
machine,pressing device,hydraulic cutter,automatic ,hydraulic
station and PLC control system.
Suitable material | PPGI/Aluminium sheet/galvanized sheet/various sheet plates |
Thickness of coil sheet | 0.2-0.8mm |
Coil width | 100mm |
Cover width | 80m |
Material of main frame | 300H steel |
Diameter of Soild shaft | 45mm, high grade 45# steel |
Roller | Quenched and tempered treatment, |
hard chrome coated 0.05-0.07mm |
Thickness of middle plate | 16mm |
Forming station | 16stations |
Drive type | By chain(1.0 inch) link bearing model 6210 |
Power of main motor | 5.5kw with Cycloidal reducer |
Power of pump station | 4kw |
Forming speed | About 8-10m/min |
Hydraulic cutting | Controlled by PLC |
PLC | DELTA(TAIWAN)/Mitsubishi |
Material of razor blades | Cr 12, quenching 58-62℃ |
Frequency converter | It has the advantage of slowing down before cutting, to ensure the |
length accuracy(±1mm, far better than industrial standard ±3mm). |
Switch | CHNT |
MATERIAL:
(1) Steel thickness: 0.5mm~2.0mm
(2) Coil width: about 130mm~220mm
(3) Raw material: galvanized steel
(4) Yield strength: about 235Mpa
(5) Forming station: about 12 station
(6) Rollers material: GCr15,
(7) Line speed: about 15m/min.
(8) Power supply: 380V/50HZ
(9) Motor power: 7.5kw
(10) Hydraulic pressure: 16 Mpa
Production Process:
Un-coil----roll forming----saw cutting----outlet finished product
Production line components:
(1) 3 Tons Hydraulic Un-coiler 1 set
(2) Roll-Forming M/C 1 set
(3) Saw cutter 1 set
(4) Product Rack (un-powered) 1 set
(5) PLC Control System 1 set
Line speed:10 m/min.