Active Member
|
[China]
Address: 郑州市高新区电子商务产业员7号楼
Contact name:
Henan WadJay Machinery Co.Ltd |
|
|
Electric Planer Shaping Machine Metal Gear Shape Machine BC6063
1. The worktable can about rotate angles, meanwhile, it is equipped with horizontal and lifting mechanism for planing inclined plane which enlarge its using scope.
2. It is convenient to adjust feedings and change tool path by adopting cam mechanism as feeding system.
3. The shaper has installed protections against overloading inside the tool path system, due to careless operation or external influences and overload cutting, the blade will slide automatically, non-destructive parts will work to ensure the normal operation of the machine.
4. The RAM, rail bed, speeding gear and major sliding guide are all lubricated by the oil pump.
5. The shaper has parking brake mechanism, therefore, it is unnecessary to cut off electric power when changing speed, starting and stopping the machine
Shaper is mainly used for planning the plane on the small and medium-size workpieces in small batch production of a single piece, forming the surface and grooves . Its five characteristics:
1. Planner bench can turing angle of the table with horizontal and lift moving mechanism; for planning the inclined plane, thereby expanding the scope of use.
2. Planner feed system uses a cam mechanism to adjust the feed rate. It is very convenient to change the feeding rate.
3. Planer equipped with cutting system overload safety angencies. Once occur careless operation, external influences or cutting overload, it will shift to self-skid, and non-sestructive the machine.
4. Gap between the ran and the bed rail, the speed gear and the main sliding guide surface, will be lubricated by the pump shot oil.
5. Planner is equipped with a clutch and parking brake device. So do not need to cut off the power when changing the speed, stard the machine or braking the machine.
| Model | BC6063 | |
| Max.shapping length(mm) | 630 | |
| Max.range of the horizontal movement of the table(mm) | 630 | |
| Max.distance between the ram bottom and table(mm) | 385 | |
| Max.length of the vertical movement of table(mm) | 360 | |
| Dimensions of table top(L×W)(mm) | 630×400 | |
| Max. stroke length of the toolhead(mm) | 120 | |
| Max.swivel angle of the toolhead(°) | ±60° | |
| Max.section of tool(W×T)(mm) | 20×30 | |
| Number of ram reciprocation per minute(NO/min) | 14-80 | |
| Range of table feed | Horizontal | 0.2-0.25 |
| Vertical(mm/recip) | 0.08-1 | |
| width of the T-slot for center positioning(mm) | 18 | |
| Power of the main motor(kw) | 3 | |
| N.W/G.W(kg) | 1750/1870 | |
| Overall dimensions(L×W×H)(mm) | 2342×1225×1480 | |
