Active Member
|
[China]
Address: 郑州市高新区电子商务产业员7号楼
Contact name:
Henan WadJay Machinery Co.Ltd |
|
|
M1080B grinding machine for centerless grinding of cylindrical parts and ring parts
M1080B is suitable for centerless grinding of cylindrical parts and ring parts, suitable for mass production. After the cutting mechanism is added, it can be used for the centerless plunge grinding of the cone parts and the formed revolving parts with a taper of not more than 1:20.
The M1080B lathe layout adopts an overhanging structure, which is convenient to replace the grinding wheel. The guide wheel shaft adopts an inner cone type sliding bearing. The user can select the cutting mechanism, the long workpiece through grinding bracket, the magnetic separator of the cooling system and other components to enhance the performance.
| Model | MM1080B | |
| Grinding diameter | Pass through | ￠5-80mm |
| Cut into the mill | ￠5-80mm | |
| Maximum grinding length | Pass through | 230mm |
| Cut into the mill | 190mm | |
| Grinding wheel specifications | 500×150×305mm | |
| Guide wheel specifications | 300×150×127mm | |
| Wheel speed | 1300r/min | |
| Guide wheel speed | 13,16,22,29,40,53,73,94r/min | |
| Guide wheel four rotation angle | Vertical plane | -2°～5° |
| In the water plane | 0°～3° | |
| Feeding handwheel per grid feed | 0.05mm | |
| Dresser feed per grid | 0.01mm | |
| Grinding wheel center to bottom distance | 210mm | |
| Total power | 17.04kw | |
| weight | 3650kg | |
| Machine dimensions | 1940×1670×1500mm | |
| Machine tool accuracy | Roundness | 0.002mm |
| Cylindricity | 0.003mm | |
| Roughness | 0.32Ra | |
Maintenance:
1. For the maintenance of the centerless grinder: the surface of
the centerless grinder and the motor, the surface of the heat
dissipating equipment must be kept clean, and the polishing
consumable powder should be cleaned regularly.
2. Check and tighten the handles, feed handwheels, screws,
nuts and other parts. Keep the machine in good condition.
3, centerless grinding machine inspection: check the screws,
belts, tightness, looseness of the centerless grinding machine
should be adjusted to the appropriate.
4. Check if the wear level of each bearing should be replaced
if there is any damage, and whether the lubricating oil is
sufficient.
5, the guide rail should be cleaned, the rail can not be
equipped with polishing consumable powder.
6, electrical appliances: regularly clean the motor,
electrical box. The electrical device is fixed and reliable.
7. Check and tighten the zeroing device. Check the button
switch, if there is any problem, replace it immediately to avoid
unnecessary danger.
