1300 * 2500mm CNC Laser Cutting Equipment , Automatic Fiber Laser Cutter

1300 * 2500mm CNC Laser Cutting Equipment , Automatic Fiber Laser Cutter
 
 
1. Machine general introduction
 
QY-FC2513 500W CNC laser cutting equipment is achieved by powerful laser focused on object to cause instant melting and evaporation, with original fiber laser source RAYCUS or USA, automatic cutting is controlled by digitalized mechanic system, this machine has condensed the technologies of laser, digital, and precise mechanics.

Our CNC fiber laser cutting equipment can cut Aluminum thickness up to 2mm, but the machine's price cheaper than the other kinds of fiber laser source, so this kinds of fiber laser cutting with high cost performance,

The laser cutting head can be adjusted through the Z axis; travelling area from 0-100mm, the laser cutting head has the automatic tracking functions which can agree with the metal wave surface.
 

This machine's other key optic parts are imported from Germany or USA , it’s the China’s price, but European quality, use the gantry working table and the whole steel welding structure which make the machine very stable movement and almost no distortion. .

2. Machine main features:
 

Our 500W CNC laser cutting equipment uses a moving gantry structure, imported high-precision screw and linear guide, smooth transmission, high precision , the X, Y, Z axes are imported from Japan servo motor, high-precision, high- speed, high-torque, high inertia, stable performance and durable. Ensure the machine's high speed and acceleration, bed with the moving beam as a whole welded structure, roughing after annealing, and then the vibration aging treatment, can completely eliminate the stress of welding and machining, good rigidity, high accuracy can be maintained for a long time does not deform.

We adopt the CNC laser cutting control special function modules, powerful, human-machine interface, easy to operate based on the Windows operating system, fiber laser cutting machine CNC system integrated, independent research and development of personalized nesting software, CNC cutting machine to achieve “full-time cutting, efficient cutting and high - nesting rate cut " core technology is the fundamental guarantee of effective material savings, improve cutting efficiency , with imported high - precision electronic control proportional valve, precise control of the cutting auxiliary gas pressure, in order to achieve the best cutting results.  

We choose the Japan Panasonic servo motor and drive, using the advanced Japan Panasonic A5 series servo motor and drive .

 
3. Application materials

Stainless steel, carbon steel, alloy steel, silicon steel, spring steel, aluminum, aluminum alloy, galvanized sheet and other metal pipes and tubes.
 

4. Cutting speed table (only for reference, the actual speed depend on the actual materials)
 

5. The machine’s main technical parameters
 

6. Machine’s main configurations
 

7. The spare parts free provided from supplier with the machine together.

※ Protection lens 2 pieces

※ Nozzle 2 pieces

※ Allen wrench 1 set

※ Cleaning paper 1 set

※ User menu 1 set

8. Installation and commissioning

The service from the seller:

1. Dispatch the qualified technicians;

2. Supervision of customer’s personnel for:

a) Supply of labors, carnages and insureance to unload machine and assist the installation work under the instruction of seller’s supervisor.

b) Positioning the machine

c) Connecting the cables and hoses to the machine

d) Prepare the installation

3. The buyer’s responsibility

a) An air compressor (mainly for pneumatic movements)

b) A bottle of liquid oxygen (the purity more than 99.99%)

d) Power: 380V 50HZ 3 phase (with a 30KW regulator)

e) Gases, air and electrical supplies are available for the connection to the machine at the nominated points.

f) Buyer is to ensure the site is clear prior to commencement of installation, adjusting and training.

g) Supply the metal sheet for commissioning testing, machine alignment and training.

h) Equipment installation location must be clean, no vibration

9. The training contents

The buyer should be arrange one or two engineer who know the basic knowledge of computer and the software to accept the training, the training will comprise of the following:

11.1. Introduce the machine’s each part’s name and the main functions.

11.2. The machine’s running theory.

11.3. Control features and the operation.

11.4. Machine maintenance and the adjustment.

11.5. Machine’s software each functions and parameters setting.

11.6. Machine’s troubleshooting and the solutions.

10. Our special Services

13.1. Before sale: buyer inform their main cutting requirements, for example the metal type, thickness and their daily capacity, then we will recommend the suitable laser cutting machine;

13.2. After confirmed the laser model, buyer can send their materials for testing if they want, or we can record the cutting demo short video and the cutting samples pictures to send to the buyer by email.

13.3. If buyer wants to come to seller’s factory to see the machine’s performance, seller will pick them up from the Shanghai Pu Dong airport by car and reserve the hotel for buyer at the same time if they need.

11. Our company mission

11.1. To provide the laser machines with European quality and China prices;

11.2. To provide the professional laser solutions to every oversea customers, not only the machine itself;

11.3. We have a strong service team who can provide the prompt after sale services to oversea customers within 12 hours.

12. The laser cutting samples: