|
[China]
Trade Verify
Address: 701 Room 7F, Jinsui Building No.10 Lucheng North road Qingxi Town Dongguan, China
Contact name:Ms Tang Binfen
YUEYANG XIANLONG MOTOR CO., LTD （KLKJ Group Co.,Ltd） |
|
Verified Suppliers
|
|
|
Compatible WESTWIND WWD1822 200,000RPM KL200P1 Air Bearing Spindle PCB PRECISION DRILLING
Quick Detail:
MODEL | REPLACE FOR | DESCRIPTION | KEY PRECISION | Machine reference |
KL200P1 | D1822 D1686 | SPEED RANGE: 20,000 - 200,000 rpm Ø6.35mm-0.05mm precision drilling | Static Runout:<2µm Dynamic Runout:<6µm Vibration:0.5 MM/S
| KLINGINBERG PLURITEC HITACHI LENZ SCHMOLL ANDERSON …. |
PRODUCT DESCRIPTION
KL200P1 higher speed rotation and higher accuracy spindle replace for WESTWIND WW D1822 Full Range from 20,000 to 200,000 rpm, air bearing type in long life, spindle weight 3.9kg with COLLET size 1/8” and body size Ø 61.9
Max power:0.85KW
Air Pressure: 6.0 -6.5kgf/cm²
Coolant:Water oil
Fixed voltage:200V
Fixed current:3A
FREQUENCY (HZ): 334-3350
PTC or NTC Sensor for choose
Square wave available
Competitive Advantage:
Low Static
Low Dynamic RUN OUT
Stable character and long life
Power and very low heat generation
ATC feeder / ATC tool change for micromachining
KLKJ Advantage
The higher spindle speeds available allow for increased productivity whilst ensuring that accuracy and repeatability is
maintained.
Advanced analysis and detailed design has created a spindle with exceptional reliability and increased efficiency.
KLKJ strong team available allows increased productivity and efficiency.
APPLICATION :
PRINT CIRCUIT BOARD PRECISION DRILLING
HOLE RANGE: Ø6.35mm-0.05mm
MACHINE REFERENCE:KLINGINBERG PLURITEC ；HITACHI ；LENZ ；ANDERSON ;SCHMOLL….
SPECIFICATION:
Coolant water temperature | 20+2 |
Static runout | <2µm |
Dynamic runout | <6µm |
Collet torque(N.cm) | >13( 1/8”) |
Vibration | 0.5MM/S |
Temperature sensor ohms KΩ | R=0.10±5% AT 25℃ |
Open air pressure | <5.0kg/cm² |
Close air pressure | >2.5 kg/cm² |
Coolant water flux | >2.0(L/min) |
Coolant oil flux | >3.8(L/min) |
Air consume flux at 20krpm | 48(L/min) |
Radial load | 6.0kgf |
Compatible D1822 200,000RPM KL200P SPINDLE DRAWING
Why choose KLKJ?
With nearly 15 years technology in spindle maintenance, 10 years success experience for spindles parts production, and 9 years spindle R&D, KLKJ succeed in offer air bearing spindle up to 200krpm.
All spindles at the KLKJ are fully checked and tested using stringent quality control procedures. KLKJ ensures every repaired spindle passes the following points to make it in long life and stable character:
1. Air flow
2. Water flow
3. End float/lift off
4. Axial load (inner)
5. Axial load (outer)
6. Torque
7. Static RUNOUT
8. Dynamic RUNOUT
9. Motor check
10. Vibration
11. Material analysis & strictly quality test detection control
12. Stringent tolerance control
