|
[China]
Trade Verify
Address: 701 Room 7F, Jinsui Building No.10 Lucheng North road Qingxi Town Dongguan, China
Contact name:Ms Tang Binfen
YUEYANG XIANLONG MOTOR CO., LTD （KLKJ Group Co.,Ltd） |
|
Verified Suppliers
|
|
|
Compatible ABL H516D WW D1722 160,000RPM KL160G PCB Drilling Spindle Precision Drilling
Quick Detail:
MODEL | REPLACE FOR | DESCRIPTION | KEY PRECISION | Machine reference |
KL160G | H516D D1722 | SPEED RANGE:20,000 - 160,000 rpm Ø6.35mm-0.05mm precision drilling | Static Runout:<2µm Dynamic Runout:<7µm Vibration:1.0MM/S
| KLINGINBERG PLURITEC HITACHI LENZ ANDERSON …. |
PRODUCT DESCRIPTION
KL160G industry standard body style and tool holding system spindle replace for ABL H516D or WW D1722 Full Range from 20,000 to 160,000 rpm, air bearing type in long life, spindle weight 4.1kg with Diameter tool 3.175mm and body size Ø 61.9,Max power 0.85KW, Collet torque(N.cm) >=150. Sensor available
The Parameter of KL160G:
Max power: 0.85KW
Coolant: Water oil
Fixed voltage:200V
Fixed current:4A
Static Runout:<2µm
Dynamic Runout:<7µm
Vibration:1.0MM/S
Competitive Advantage:
Low Static
Low Dynamic RUN OUT
Stable character and long life
Power and very low heat generation
Good slot and big hole drilling
Less running costs
ATC feeder / ATC tool change for micromachining
Environment friendly
KLKJ Advantage
The higher spindle speeds available allow for increased productivity whilst ensuring that accuracy and repeatability is maintained.
Advanced analysis and detailed design has created a spindle with exceptional reliability and increased efficiency.
KLKJ increased productivity and efficiency available allows mass production drilling and routing spindle.
APPLICATION :
PRINT CIRCUIT BOARD PRECISION DRILLER
2 HEAD OR 4 -6 HEAD DRILLER
HOLE RANGE: Ø6.35mm-0.05mm
MACHINE REFERENCE: SCHMOLL POSALUX KLG PLURITEC KLINGEINBERG LENZ EXCELLON HITACHI
SPECIFICATION:
Air Pressure | 6.0 kgf/cm² |
Coolant water temperature | 20+2 |
Static runout | <2µm |
Dynamic runout | <7µm |
Collet torque(N.cm) | >=150( 1/8”) |
Vibration | 1.0MM/S |
Collet size | Ø1/8” |
Temperature sensor ohms KΩ | R=0.1±5% AT 25℃ |
Open air pressure | <5 kg/cm² |
Close air pressure | >2 kg/cm² |
Coolant water flux | >1.5(L/min) |
Coolant oil flux | >3.0(L/min) |
Air consume flux | 74(L/min) |
Radial load | 6.0kgf |
Air Pressure | 6.0 kgf/cm² |
KL160G SPINDLE OUTLINE DRAWING
Why choose KLKJ?
With nearly 15 years technology in spindle maintenance, 10 years success experience for spindles parts production, and 9 years spindle R&D, KLKJ succeed in offer air bearing spindle up to 200krpm.
All spindles at the KLKJ are fully checked and tested using stringent quality control procedures. KLKJ ensures every repaired spindle passes the following points to make it in long life and stable character:
1. Air flow
2. Water flow
3. End float/lift off
4. Axial load (inner)
5. Axial load (outer)
6. Torque
7. Static RUNOUT
8. Dynamic RUNOUT
9. Motor check
10. Vibration
11. Material analysis & strictly quality test detection control
12. Stringent tolerance control
Spindle Quality From Customer
