WNMG080408CM CNC Carbide Turning Inserts for Stainless
Steel SemiFinishing with Perfect Edge
Application:
- ISO M Materials, Semi-Finishing Turning of All Types of Stainless
Steel.
Feature Advantage:
- The price has obvious advantages over Japan, South Korea and
mainstream European and American brands.
- Consider different stainless steel properties, through excellent
groove design, with ideal coating and professional surface
treatment technology.
- Through a large number of customer application verification, the
performance and life of stainless steel series turning inserts
reach the level of mainstream brands in Japan, South Korea and
Europe.
- Grades:
- High coating hardness and excellent high temperature resistance,
with high processing efficiency and reliability under high
temperature cutting conditions.
- Special coating treatment technology, the coating and matrix are
more firmly bonded.
- Coating stress relief treatment, effectively improve tool life,
improve stability, and make tool life predictable.
Grade | Coating | Performance | Equivalent Grade |
MP1215 | PVD TiAlN Nano-Coating | - Better versatility
- Good high temperature resistance
- Suitable for occasions where the rigidity is relatively poor
| GC1030 GC2030 VP15TF TT9030 |
MP1315 | PVD TiAlN Nano-Coating | - Higher hardness
- Better PVD coating
- Suitable for higher cutting speeds
| GC1025 VP15TF TT9030 |
MC4225 | Excellent CVD Coating | - Higher hardness and wear resistance
- Suitable for higher cutting speeds
| GC2025 GC2135 US735 TT5100 |
- Suitable for semi-finishing of stainless steel with a depth of cut
of 1-3 mm.
- Chipbreaker designed for stainless steel's highly viscous, highly
plastic, difficult-to-machine materials.
- Fast cutting and good control of iron filings for excellent surface
quality.
- Precision polishing edge improves the toughness of the cutting
edge, reduces the cutting force, reduces the sticking phenomenon,
and significantly improves the stability of the insert.
- Strengthened the impact resistance of the cutting edge on the basis
of sharp edge, suitable for semi-finishing and intermittent
processing of various stainless steels.
- Types:
- ISO standard turning inserts are available in a variety of
conventional types
- Different tool nose arcs (0.2, 0.4, 0.8) for each type
Negative Insert
Serial | Type | MP1215 | MP1315 |
C | CNMG1204 * -MM | ★ | ★ |
C | CNMG1606 * -MM | ★ | ★ |
C | CNMG1906 * -MM | ★ | ★ |
D | DNMG1104 * -MM | ★ | ★ |
D | DNMG1504 * -MM | ★ | ★ |
D | DNMG1506 * -MM | ★ | ★ |
S | SNMG1204 * -MM | ★ | ★ |
S | SNMG1506 * -MM | ★ | ★ |
S | SNMG1906 * -MM | ★ | ★ |
T | TNMG1604 * -MM | ★ | ★ |
V | VNMG1604 * -MM | ★ | ★ |
W | WNMG0604 * -MM | ★ | ★ |
W | WNMG0804 * -MM | ★ | ★ |
Positive Insert
Serial | Type | MP1215 | MP1315 |
C | CCMT0602 * -MM | ★ | ★ |
C | CCMT09T3 * -MM | ★ | ★ |
C | CCMT1204 * -MM | ★ | ★ |
D | DCMT0702 * -MM | ★ | ★ |
D | DCMT11T3 * -MM | ★ | ★ |
S | SCMT09T * -MM | ★ | ★ |
S | SCMT1204 * -MM | ★ | ★ |
T | TCMT0902 * -MM | ★ | ★ |
T | TCMT1102 * -MM | ★ | ★ |
T | TCMT16T3 * -MM | ★ | ★ |
V | VBMT1103 * -MM | ★ | ★ |
V | VBMT1604 * -MM | ★ | ★ |
V | VCMT1103 * -MM | ★ | ★ |
V | VCMT1604 * -MM | ★ | ★ |
Recommended Cutting Parameters:
- The following cutting parameters are the recommended range values.
Appropriate adjustments and selections should be considered after
considering the following factors:
- Specific physical properties of stainless steel
- The actual condition of the part blank
- Power and rigidity of the machine tool
- Clamping rigidity of tools and workpieces
- Balance between tool life and processing efficiency
| | | MP1215 | MP1315 |
| | | Feed (mm/rev) | |
| | | 0.1-0.4 | 0.1-0.4 |
ISO | Material | Hardness (HB) | Speed (m/min) | |
M | Ferritic stainless steel | 180 | 290-190 | 300-190 |
M | Austenitic stainless steel | 260 | 240-160 | 250-160 |
M | Martensitic stainless steel | 330 | 250-170 | 260-170 |