SHANGHAI BELIEVE INDUSTRY CO., LTD |
2 in 1 Top Hat DIN Rail Roll Forming Machine
BELIEVE INDUSTRY COMPANY is experienced in designing and building metal roll forming machines. This 2 in 1 DIN rail roll forming machine can produce 2 sizes of top hat section rails in 1 machine. Main material applicable are the cold rolled galvanized steel coils with 0.8-1.5mm thickness. Besides the top hat type, which also known as Omega type, we can make machine for producing C section rails and G section rails based customers' requirement.
Top Hat Type Rail Drawing
This drawing is for reference only, final design will be based on customers' profile drawings and requirement.
1. Material Type: cold rolled steel coils, galvanized steel coils, 235-345Mpa
2. Material Thickness: 0.8-1.5mm
3. Coil Width: as per customers' profile drawing
Machine Layout and Work Flow Chart
Work Flow: Decoiling and leveling ---> servo feeding and punching ---> feeding and guiding ---> roll forming---> cutting into length ---> collecting
Main Technical Parameters:
1. Decoiler: 2Ton decoiler / 3Ton decoiler decoiler
2. Levelling unit: 7-roller decoiler, 1.5kw for levelling
3. Punching unit: hydraulic punching unit, 11kw for punching
4. Material of punching molds: Cr12Mov, HRC58-62
5. Roll forming steps: 14 steps
6. Material of shafts: 40Cr, 70mm in diameter, HB220-260
7. Material of rollers: GCr15, HRC58-62
8. Power for roll forming: 7.5kw
9. Line speed: 6-8m/min
10. Drive and transmission: electrically motor drive via chain and sprockets
11. Cutting type: hydraulic cutting after roll forming
12. Cutting power: 5.5kw
13. Material of cutting molds: Cr12Mov, HRC58-62
14. Cutting length tolerance: +/-1.5mm
15. Control system: PLC control system, Panasonic brand
If you need more machine information, please contact us directly.