SHANGHAI BELIEVE INDUSTRY CO., LTD |
|
Metal Corrugated Roofing Sheet Roll Forming Machine To Pilippines
Brief Description
Corrugated sheets roll forming machine is designed for producing metal wall cladding or roofing panels for commercial, industrial and residential buildings. This corrugated roofing roll forming machine is exported to the Pilippines.
Main material used is 0.3-0.8mm thick galvanized steel coils. Material go through decoiling, feeding and guiding, roll forming, hydraulic cutting and then come out the finished products.
Machine Layout And Work Process
Workflow: decoiling--->guiding--->roll forming--->cutting--->end products output
Main Components Of The Whole Line
1. | 5Ton Automatic Decoiler | Made In-House |
2. | Feeding And Guiding Device (Manual Adjust) | Made In-House |
3. | Roll Forming Unit (Chain Drive Type, bearings are from famous brand) | Made In-House |
4. | Hydraulic Cutting Device | Made In-House |
5. | End Product Support Frame | Made In-House |
6. | Electric Control System (International famous brands such as Panasonic, Siemens) | Purchased Part |
7. | Hydraulic Station (Famous Local Brand) | Purchased Part |
End Product Picture For Reference
Machine Technical Parameters
1. | Applicable Material | GI Coils, PPGI Coils |
2. | Material Thickness | 0.3-0.8mm, 235-345Mpa |
3. | Material Width | 914mm, 1000mm, 1200mm, 1250mm |
4. | Diameter of Shafts | 76mm |
5. | Material of Shafts | 40Cr, heat treatment, shafts surface with Chrome plated |
6. | Material of Rollers | High quality 45# steel |
7. | Main Forming Power | 7.5KW |
8. | Forming Speed | 15-20m/min not including cutting |
9. | Forming Stations | 18 forming steps / 18 roll forming stations |
10. | Drive Type | 1.2" Chain drive |
11. | Cutting Type | Hydraulic cutting; stop-to-cut: whole line stop when cutting |
12. | Cutting Power | 4KW for cutting |
13. | Material of Cutting Blade | Cr12Mov, HRC 60-62 |
14. | Control System | Panasonic PLC control system |
Video For This Machine