Active Member
|
[China]
Contact name:Darren Mao
SHANGHAI BELIEVE INDUSTRY CO., LTD |
|
|
This roll forming machine can produce 3 different profiles of light steel frames at one time. 3 sets of rollers are loaded on 1 shaft and each set of rollers is for one profile. Also, there are 3 sets of cutting blades assembled on the machine. When the cutting length of these 3 profiles are the same, 3 profiles can be produced at the same time.
Advantages Of 3 Profile In 1 Design
* Save Machine Cost
All 3 sets of rollers share the same machine base, shaft, drive system, electric control system and hydralic system.
* Save Floor Area
Almost the space of 2 light steel roll forming lines is saved.
> Material Information | |
| 1. Applicable Material: Galvanized steel coils 2. Material Thickness: 2mm 3. Material Width: 168mm, 170mm, 163mm | |
> Manual Decoiler | |
| 1. Decoiler Mandrel Expansion And Tension: Manual adjust 2. Coil Releasing: No power supply 3. Loading Capacity: 5000kg 4. Max Coil O.D: 1500mm | |
> Roll Forming Unit | |
| 1. Forming Steps: 14 steps 2. Forming Speed: 10-15m/min 3. Main Motor Power: 5.5kw 4. Roller Material: No. 45 steel, quenching and tempering, surface with chrome plated ≥ 0.05mm 5. Shaft Material: 40Cr; Diameter: 70mm 6. Roll Forming Rollers: 3 sets 7. Machine Structure: H beam steel welded structrue work as the machine base 8. Roll Stands: Steel plate welded on the machine base as an integration 9. Drive: Chain drive | |
> Hydraulic Cutting Device | |
| 1. Cutting Blades: 3 sets 2. Cutting Type: hydraulic cutting, stop-to-cut 3. Cutting Blade Material: Cr12Mov, HRC58-62 4. Cutting Power: 4kw | |
> Electric Control System | |
| 1. Control System: PLC control system, Panasonic brand 2. Encoder: Omron Brand 3. Frequency Inverter: YASKAWA 4. Touch Screen: MCGS |
