Hydraulic Control Semi Automatic Pipe Bending Machine For Healthcare Industry Processing

Hydraulic control semi automatic tube bending machine for healthcare industry processing

-- Description of machine

    This bending machines of NCBA series are made by the advanced Italian techniques and are automatic stereo pipe benders with the collecting machine, liquid and electricity to integrate. This machine adopts the advanced imported touch screen operation and it can input, store a variety of elbow data and instruction. It has three-dimensional continuous indexing in automatic multi angle and the manual feeding is to the need for complex work piece machining accuracy. It is a European style bending equipment which is professional, high-speed and economical.

-- Installation points

    1. Bending die installation

    Plunge the elbow in a clockwise direction and cap it. Replace the required elbow wheel die and tighten the cap.

    2. Clamp mold installation

    Insert the clamping die with adjusting bolts, adjusting plates and cover plates into the clamping die holder and connect the adjusting bolts. The clamping die of the adjusting plate, cover plate, etc. is inserted into the clamping die holder and the adjusting plate is inserted. Fix on the clamp mold base and rotate the adjusting bolt so that the center of the clamp mold and the center of the bend tube mold are on the same plane. Then adjust it as follows:

    2.1. Loosen the clamping bolts and press the manual “Pinch” button until the clamped mold reaches the end point (there is a gap between the bending tube mold and the clamping mold).

    2.2. Adjust the clamping mold seat adjustment screw so that the clamping mold and the bending tube mold are fully compressed.

    2.3. Press the “Retreat” button to retract the clamping mold, and then turn the clamping mold adjustment screw into about 1/4-1/2 turns.

    2.4. Lock the clamping block fixing bolt.

    3. Skateboard die adjustment method ditto

    4. Mandrel and cylinder installation

    4.1. Screw the mandrel onto the mandrel screw and fix the mandrel to the proper position to fix the nut.

    4.2. Relax the mandrel cylinder bolts.

    4.3. The pointer of the moving mandrel cylinder block is related to the scale of the rail holder and the radius of the elbow.

    4.4. Lock the mandrel and cylinder.

    5. Anti-crease device

The wrinkle-resistance mold is mounted on the wrinkle-proof plate seat, and it can be properly adjusted as shown in the figure by 1° to 2°.

    6. Bending angle adjustment

    The bend angle control is controlled by a proximity switch, a scale display is shown at the adjustment position of the proximity switch, and the proximity switch adjustment block is adjusted to a desired angle.

Above is the first angle, below is the second angle, corresponding to the angle/double angle selection on the operation panel, after the trial bend and then trim the angle. Because the material of the pipe is different, the rebound amount is also different. After the adjustment is completed, the locking screw lock nut on the nut will be adjusted.

    7. Overflow valve pressure adjustment

    Press any of the manual buttons of pinch tube, back clamp, core, and back core to release the pressure displayed on the pressure gauge. At this time, rotate the pressure relief handle of the overflow valve to adjust the pressure to the desired pressure of 10 MPA. The bending resistance should not be too high, so as not to increase the oil temperature and to accelerate the wear of hydraulic components.

-- Main application

    Recommended application industry: automobile fittings, oil pipe for brake, muffler, seats, motorcycle fittings, healthy equipment, air-conditioning, bicycle, steel furniture, sanitary wares and so on.

    Automobile fittings, brake lever, silencer, seats, motorcycle, body-building equipment, air conditioner, bicycle, steel-made furniture, sanitation equipment and other manufacturing trades.

    House structure, shipyards, automobile production, industrial pipeline equipment, pulp, paper, chemicals, boilers, pump stations, site fresh water and wastewater systems, municipal heating and cooling systems, urban gas pipelines, municipal works such as hospitals, office buildings, construction and large-scale public buildings, medium and large-scale industries for maintenance and repair work, power stations, installation companies, automatic fire sprinkler systems in front of workshops.

-- Specifications of machine

-- Packaging and service

    1. Payment terms: 30% T/T down payment and 70% T/T before shipment.

    2. Delivery time: No later than 15 days since receiving the advance payment.

    3. Validity of the price: For ONE month.

    4. Package: Wooden case.

    5. Warranty period: We guarantee machine quality for 12 months. During this period, if spare parts of the machine were damaged, we can send the component to the customer by international express service freely.

-- Pictures of machine