Active Member
|
[China]
Address: B1011, Huarun Development Building, South of Fushou East street And West of Dongfang Road, Fuhua Community, Xincheng Sub-district Office High-tech Development Zone, Weifang, Shandong Province
Contact name:
Weifang Donho Machinery Co.,Ltd |
|
|
Fanuc oi-MF Control System 3 axis CNC Milling Machine Aluminum Engraving
Advantage
1. Using high rigid structure of cast iron, with resin sand molding and through aging (tempering process) processing, to ensure the accuracy of machine tool use for a long time stability, provides guarantee for the reliability of the machine tool performance;
2. A centralized automatic lubrication device intermittently, lubrication sufficient and reliable, and can timing quantitative in three directions of guide rail, screw lubricating points such as lubrication, just in time to the fuel tank of oil is ok.When the oil tank is short of oil, the system automatically alarms;
3. The three directions of X, Y and Z are covered by the stainless steel telescopic shield to ensure the cleaning of the screw and guide rail, ensuring the transmission and motion accuracy of the machine tool;
4. X, Y, and Z are in three directions, with high precision and high strength ball screw, high speed, high positioning accuracy of machine tool;
5. The outer protection of machine tools is completely closed structure design, safe and reliable, beautiful and generous;
6. The configuration of machine tool numerical control system, nanjing opening system, complete function, accuracy and stability, reliable.
Specifications
| Type | unit | DHVMC-850 | |
| Table | Table size | mm | 1000*500 |
| Max. load of worktable | kg | 400 | |
| T slot no./width/distance | mm | 18x5x90 | |
| Spindle | spindle nose to table surface | mm | 150-650 |
| spidle axis to column surface | mm | 572 | |
| Speed Range | rpm | 10,000 | |
| Spindle taper | Type | BT-40 | |
| Spindle head casing aperture | mm | φ140mm | |
| Spindle driver | - | Belt transmission | |
| Auto tools change | Maximum tool diameter | mm | Φ80(Φ130) |
| Maximum tool length | mm | 300 | |
| Maximum tool weight | kg | 8 | |
| Shank | Type | BT-40 | |
| Tool magazine capacity | Pieces | 24 | |
| Tool exchange method | - | Knife arm | |
| Tool exchange time (knife-to-knife) | Sec | 1.8 | |
| Rivet | Type | P40-1( 45°) | |
| Others | Air source pressure demand | kg/cm | 6 |
| Cutting water tank capacity | L | 250 | |
| positioning accuracy | mm | 0.01 | |
| Repeatability accuracy | mm | 0.008 | |
| Floor area and height | mm | 2550*2250*2400 | |
| Machine weight | kg | 5000 | |
Machine Details
Auto Chip conveyor
The device has the advantages of serialization, generalization and standardization, simple operation, reliable operation, convenient disassembly and assembly, and easy maintenance. It can also be used in conjunction with other chip evacuation devices to form a variety of cutting arrangements.
1. It can handle all kinds of chips; it can also be used as a conveying device for small parts of stamping and cold pier machine tools.
2. High conveying efficiency and large selection range of conveying speed;
3. The width of the chain plate is diversified, and the structural form is divided into two types: a seamless chain plate and a seam chain plate. 4, streamlined shape, beautiful appearance, smooth chip removal.
4. With overload protection.
Fanuc servo motor
The FANUC servo is a high-speed, high-precision and high-efficiency intelligent servo system. The compact structure enables high-speed, high-precision and energy-saving machine tools.
Nano Control: Rotating extremely smooth servo motor, 32 million/REV high resolution pulse encoder, high precision current sense servo amplifier, high speed, high precision servo HRV control
High-speed, high-efficiency: high-speed, high-speed electric spindle can be realized by winding switching, and the spindle HRV control with increased speed and fast response can be realized.
Compact body, saves wiring: short body servo and spindle motor, space-saving thin servo amplifier.
Improve maintenance performance: ID and motor temperature information for quick maintenance, built-in insulation degradation detection function, global preventive maintenance.
Hiwin rail
Due to the rolling friction method, when the linear guide is used as the linear guide, not only the friction coefficient is reduced to 1/50 of the sliding guide, but also the difference between the dynamic friction and the static friction is small. Therefore, when the bed is running, there is no slippage, the positioning accuracy of μm can be achieved, and the machine can maintain the accuracy for a long time. The power loss of the machine can be significantly reduced, and the heat generated by the friction is small, which is suitable for high-speed operation. The special beam structure design can bear the load in the up, down, left and right directions at the same time. Easy to assemble, it maintains accuracy and is interchangeable, allowing you to replace sliders or rails or even linear guide sets. The lubrication structure is simple and easy to oil.
Casting structure,
the whole machine adopts GB300 advanced resin sand castings, and the internal stress is eliminated by tempering treatment and vibration and natural aging treatment. One-piece upper water-disc type wide base, five large parts are mesh internal structure, bottom ultra-wide "human" shaped column, triangular inverted T-shaped middle sliding seat, body oil-water separation structure (pre-water after oil), built-in Pipeline. the body oil and water separation design, the oblique angle discharge port and the swarf all aspects design, the rigidity of the body, easy to remove the chips and the cutting fluid is not easy to smell and leak, and so on, using the front chip removal method.
Effectively enhance dynamic accuracy and service life.
Full cover shroud
The utility model comprises a lower protective front baffle, a lower protective left baffle, a lower protective tail baffle, a lower protective right baffle, an upper protective front panel, an upper protective left panel, an upper protective rear panel and an upper protective right panel, the lower protective front The baffle, the lower protective left baffle, the lower protective baffle and the lower protective right baffle are sequentially connected to form a rectangular lower protective frame, the upper protective front panel, the upper protective left panel, the upper protective rear panel and the upper protective right The panels are sequentially connected to form a rectangular upper protective frame placed on the rectangular lower protective frame and connected to each other; the upper protective front plate is provided with a front window, and the front window is provided with a laterally laterally outer side Door, left inner door, right inner door and right outer door. The utility model has the advantages of simple structure, reasonable design, effective protection for the processing center, convenient opening, and favorable daily maintenance operation.
