Structure and characteristics
The upper and lower flange of the feed valve shell has two types,
the circular flange and the square flange, so as to be convenient
for users to match. The transmission type has the direct connection
type and the chain wheel, the chain wheel type is the side
connection type, its structure is compact, the appearance is
beautiful. The seal between the left and right end caps and the
impeller spindle is the advanced technology of our company to
ensure the sealing is reliable and no leakage. Pressure balancing
device can be provided according to the pressure requirements of
upper and lower chamber. The utility model has the advantages of
easy arch and easy to stick material, and the arch breaking device
and the glue removing and cleaning device can be adopted. Impeller
with "one" "V" "U" and other forms, according to specific
requirements for targeted selection. According to the type is
divided into standard type, high pressure, wear resistant, lining
type, card type, cleaning type. Different materials can be selected
according to different requirements, such as 304, 304L,, 316L,
etc.. Can be equipped with speed reducer or explosion-proof motor
to meet the explosion-proof requirements of the occasion. Bearing
chamber (both sides) can be equipped with air tight seal cover, to
ensure that the bearing is filled with high pressure air, so that
the material can not enter, improve the reliability of use. The blade
end can be provided with a wear resistant sealing strip, which is used to further improve the locking effect.
It can be used to improve the wear resistance of the shell
structure design, the main parts of precision casting, load
capacity, deformation is very small. The leakage gas balance is set
up to improve the transmission efficiency. Can use a special form
of shaft seal structure to ensure the reliability of shaft seal.
Can easily configure the sensor.