1. Company introduction:
Shandong Zhongtaida Industrial Equipment Co., Ltd. was established
in the year of 2004, and it is a qualified with designing and
manufacturing D1/D2 pressure vessel, installing and maintaining GC3
industrial pressure pipe. Our main products include jacketed
cooking kettle, retort sterilizer, rubber products vulcanizing
autoclave machine and carbon fiber autoclave. And our products are
very popular with customers at home and abroad.
3. Autoclave Brief Introduction:
For steam direct heating vulcanization autoclave, the temperature,
pressure and vulcanization time are controlled automatically.
Specialty thermal conductive heat sink have good heat dissipation
performace and long service life. The steam enter through two
automatic angle seat valves from back of tank, and the diffusion
tubes of thermal conductive heat sink are uniformly arranged in the
tank. The hot air in the wind shield is pushed to the tank door through draught fan and then
turn back. Hot air circulate continuously from front to back of the
tank and distribute heat uniformly. And the temperature is even and
no dead angle in the tank, the pressure is constant. Thus it can
prevent the different quality of the product because of the uneven
temperature and pressure.
After set working procedures, the heating, heat preservation,
vulcanization, etc. can be finished by automatic control system.
When vulcanization finished, the equipment will give alarm.
4. Application Scope:
Horizontal autoclave is mainly used for vulcanizing non-modeled
rubber products, such as rubber shoes, rubber hose, cable, rubber
roller, tape, etc., sometimes, is also used for vulcanizing modeled
5. Classification of Autoclave:
1)According to control method:
full automatic type and semi automatic type
2)According to heating method:
l Steam direct heating autoclave;
l Steam indirect heating autoclave;
l Dry heating autoclave;
l Electric heating hot water autoclave.
3)According to open-door method:
l Manual quick open the door;
l Electric motor door;
l Hydraulically automatic open the door.
6. Technical Parameter:
|LENGTH (mm)||MEDIUM||DESIGN PRESSURE (Mpa)||TEMPERATURE (°C)|
Those autoclave in the chart are standard configurations.
We also can customize autoclave according to your specific
requirements or your drawing.
1)Door Sealing Method:
Using inflatable silicone ring, the sealing effect is better than
other way. The service life of sealing ring is more than one year.
2)Air circulation device:
Air circulation device consists of blower fan and wind shield.
Hot air circulates in the tank through high temperature and
pressure integrated blower fan and specialty wind guard, to ensure
there is no dead angle in the tank and improve the quality of
3)Safety Interlock Device:
Safety Interlock: Safety interlock device is used to prevent unsafe
incidents caused by mistake operation in pressure situations. The
equipment is designed with 2 sets of safety interlock device:
a. Automatic Pressure Safety Interlock: When pressure reaches
0.01mpa in the tank, suspension interlock will lock the door
tightly. The door can’t be opened in pressure situations.
b. Quick Open Safety Interlock: When working, only after shut
manual interlock valve, the tank can be pressurized, otherwise
manual interlock valve is in communication with the outside of the
tank, the tank can’t form pressure. You must open manual interlock,
otherwise the door can’t be rotated and can’t be opened. This
ensures that the door only can be opened in no pressure situations.