Active Member
|
[China]
Address: Building 12, Songshan Lake, Small and Medium-Sized Science and Technology Park, Dongguan City, 523808, Guangdong Province, P.R.China
Contact name:KOMEG
KOMEG Technology Ind Co., Limited |
|
|
64L High and Low Temperature Climate Test Box With In-hole operation For Calibration
Product description:
Able to accurately simulate a wide range of complicated natural environments, and is suitable for reliability
test in industrial products. Meet GB5170.2.3.5.6-95 standard requirements of environmental testing
equipment and test methods for the basic parameters of electric and electronic products under the condition
of humidity, low temperature, high temperature, and constant heat.
Specification
| Capacity(L) | 64L
|
| Temperature range | L :-40℃ ～ +150℃ R : :-20℃ ～ +150℃ S:-70℃ ～ +150℃ |
| Temp Deviation | ≦ ± 2.0℃ |
| Size | Workspace volume: W 400 × H 400 × D 400 mm
Exterior size: W 600 × H 1550 × D 1220 mm (about) |
| Temp Fluctuation | ±0.5℃ |
| Heat up rate | Heating up rate: -40℃↑ +100℃ about 45min (no-load, ambient temperature +25℃)
Cooling rate: 20 ℃to -40℃about 60min (no-load, ambient temperature +25℃) |
| Humidity range | 20%R.H～98%R.H
|
| Door |
Single door, left open. Heating wire was installed at the door frames to prevent
condensation at low temperatures. |
| Humidity uniformity | 3.0％RH (no-load) |
| Load | Product calorific value 1000w
|
| Humidifier | Water basin heating and humidification method;
Stainless steel sheathed heater;
Heater control: no-contact control (SSR);
Water level control device, heater anti-dry device
|
Product picture
