Active Member
|
[China]
Address: Building 12, Songshan Lake, Small and Medium-Sized Science and Technology Park, Dongguan City, 523808, Guangdong Province, P.R.China
Contact name:KOMEG
KOMEG Technology Ind Co., Limited |
|
|
Climatic Thermal Shock Chamber High and Low Temperature Impact Test Chamber
Product Introduction:
The thermal shock test chamber is the perfect testing machine of electronic components, metal, chemical materials, automation components, communication module, national defense industry, aerospace industry, BGA, PCB substrate, electronic chip IC, semiconductor ceramic and high polymer materials.
Features:
1. Perfect appearance and easy to operate.
2. Japan LCD English microcomputer temperature controller, with high memory capacity, can save 100 programs, max 9999 cycles, each cycle max time 999hrs.
3. Three chamber structures, high temperature chamber, low temperature chamber and test chamber, control automatically, stay and switch time adjustable.
4. Perfect protection alarm functions: short-circuits, Leakage, over temperature of work chamber; compressor over pressure, over load, short water…
5. Control interface will display alarm reason and provide check methods, machine has emergency stop button.
6. Cold and hot shock temperature recover within 5 minutes, which complies with MTL, IEC, JIS, GJB and other international standards.
7. With RS-232C communication port for connecting PC to control, record and save test report.
Specifications
(1) KTS-A Series
| Model |
| ||||||||
| 72A | 100A | 150A | 200A | 252A | 300A | 480A | |||
| Inside size(mm) | W | 450 | 500 | 600 | 670 | 700 | 800 | 800 | |
| H | 400 | 450 | 500 | 600 | 600 | 600 | 800 | ||
| D | 400 | 450 | 500 | 500 | 600 | 650 | 750 | ||
| Outside size(mm) | W | 1490 | 1540 | 1640 | 1720 | 1750 | 1850 | 1850 | |
| H | 1790 | 1840 | 1890 | 2000 | 2000 | 2000 | 2200 | ||
| D | 1600 | 1700 | 1830 | 1850 | 1930 | 1980 | 2500 | ||
| Test weight | 5 | 10 | 12 | 15 | 18 | 20 | 20 | ||
| Low Temp Chamber | -55ºC～-10ºC, Pre cooling time: ≤ 60 min from +20ºCto-55ºC | ||||||||
| Test Chamber | -40ºC～+150ºC | ||||||||
| High Temp Chamber | +60ºC～+200ºC ,Within 20 min, Pre-heating time | ||||||||
| Transition time | ≤15S | ||||||||
| Recovery time | High-Temp Exposure 30 min to reach & stabilize required hot temp of test sample | ||||||||
| Low-Temp Exposure 30 min to reach & stabilize required cold temp of test sample | |||||||||
| ≤ 5 min | |||||||||
| Ambient Temp. | +5ºC～+35ºC | ||||||||
| Power | AC 380±10％ 50Hz ,3 phase 4 wires +Ground Wires | ||||||||
(2) KTS-B Series
| Model |
| ||||||||
| 72B | 100B | 150B | 200B | 252B | 300B | 480B | |||
| Inside size(mm) | W | 450 | 500 | 600 | 670 | 700 | 800 | 800 | |
| H | 400 | 450 | 500 | 600 | 600 | 600 | 800 | ||
| D | 400 | 450 | 500 | 500 | 600 | 650 | 750 | |
| Outside size(mm) | W | 1490 | 1540 | 1640 | 1720 | 1750 | 1850 | 1850 |
| H | 1790 | 1840 | 1890 | 2000 | 2000 | 2000 | 2200 | |
| D | 1600 | 1700 | 1830 | 1850 | 1930 | 1980 | 2500 | |
| Test weight(KG) | 5 | 10 | 12 | 15 | 18 | 20 | 20 | |
| Low Temp. chamber | -70ºC～-10ºC ,Pre cooling time: +20ºC～-70ºC ,≤ 60 min | |||||||
| Test. Chamber | -55ºC～+150ºC | |||||||
| High Temp. chamber temperature | +60ºC～+200ºC,Preheating time: ≤20 min | |||||||
| Transition time | ≤15S | |||||||
| Recovery time | High-Temp Exposure 30 min to reach & stabilize required hot temp of test sample | |||||||
| Low-Temp Exposure 30 min to reach & stabilize required cold temp of test sample | ||||||||
| ≤ 5 min | ||||||||
| Ambient Temp. | +5ºC～+35ºC | |||||||
| Power | AC 380±10％ 50Hz ,3 phase 4 wires +Ground Wires | |||||||
(3) KTS-D Series
| Model |
| ||||||||
| 72D | 100D | 150D | 200D | 252D | 300D | 480D | |||
| Inside size(mm) | W | 450 | 500 | 600 | 670 | 700 | 800 | 800 | |
| H | 400 | 450 | 500 | 600 | 600 | 600 | 800 | ||
| D | 400 | 450 | 500 | 500 | 600 | 650 | 750 | ||
| Outside size(mm) | W | 1490 | 1540 | 1640 | 1720 | 1750 | 1850 | 1850 | |
| H | 1790 | 1840 | 1890 | 2000 | 2000 | 2000 | 2200 | ||
| D | 1600 | 1700 | 1830 | 1850 | 1930 | 1980 | 2500 | ||
| Test weight | 5 | 10 | 12 | 15 | 18 | 20 | 20 | ||
| Low Temp Chamber | -80ºC～-10ºC, Pre cooling time: ≤ 60 min from +20ºCto-80ºC | ||||||||
| Test Chamber | -65ºC～+150ºC |
| High Temp Chamber | +60ºC～+200ºC ,Within 20 min, Pre-heating time |
| Transition time | ≤15S |
| Recovery time | High-Temp Exposure 30 min to reach & stabilize required hot temp of test sample |
| Low-Temp Exposure 30 min to reach & stabilize required cold temp of test sample | |
| ≤ 5 min | |
| Ambient Temp. | +5ºC～+35ºC |
| Power | AC 380±10％ 50Hz ,3 phase 4 wires +Ground Wires |
FAQ:
Why choose us?
1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.
2.Excellent After sale Service:
12 months warranty. Besides, we can help you to repair your problem
controller freely, Free replacement parts, even it's not from our
factory's. What you need to do is to send us the controller.We can
offer operation video and English operation muanual. We can provide
video-con
3.Commitment:
We will sign a letter of commitment while we sign the contract,
which will improve your confidence to us.
4.Good Packaging:
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
How to install and use the product?
We will send you operating instructions, English video by Email. Or
you can download on our officail website directly.
Most of our machine is shipped with a whole part, which means it is already installed, all you need to do is to connect the power cable and start to use. And if possible, we can also install your machine at site.
