Touch Screen Cyclic Salt Spray Test Chamber / Salt Fog Corrosion Test Machine

Configured for your specific tests

KOMEG makes rain and spray testing easier by offering a standard chamber capable of published and OEM proprietary test methods.
The standardized design can be configured for the rain/spray tests you need, eliminating the guesswork in buying a chamber. The system is based on the specification requirements, and can also accomplish individual automaker’s tests, as well as electrical-enclosure tests.

Our Design

KOMEG's modular design allows you to add on additional features, depending on the number and type of tests required. One possible choice is to integrate the spray system with a regular temperature and humidity chamber to save money and floor space, while also creating an opportunity to simulate actual operating conditions your product may experience.

Our system uses multiple control solenoids to vary the water's spray volume/pressure. A holding tank prepares the water to the desired temperature, if required. A pump ensures the water is delivered in the proper pressure range. The water is fed to a motorized manifold that rotates the spray arms. Each spray arm has an adjustable valve to allow finer control of the spray.

Testing capabilities

The specification is modeled after and doesn’t differ greatly. Details about the nozzle types and the rotating nature of the spray arms and product table are also included in the requirements. Additionally, drip and car wash tests are also specified.

Specifications:

Structure(figure1)

Instruction:

(1) Spray tower

(2) Funnel cup

(3) Touch screen controller

(4) Regulator

(5) Pressure gauge

(6) Metering cylinder

Controller(figure 2)

Controller instruction:

(1)Chamber real-time temperature

(2)Chamber temperature setting

(3)Actual test time

(4)Test time setting

(5)Accumulative time

(6)Power swithch

(7)Machine start/stop working button

(8)Spray start/pause button

(9)Test chamber low water alarm

(10)Defog after test

(11)Salt water tank low water alarm

(12)Reduce setting value

(13)Increase setting value

(14)Pressure barrel low water alarm

(15)Non-spray time setting

(16)Spray time setting

(17)Pressure barrel temperature setting

(18)Pressure barrel real-time temperature

Control system:

Test chamber temperature control: Control the chamber temperature , according to standard, NSS AASS test is 35℃,and CASS test is 50℃.

Pressure barrel temperature control:Control the saturated air barrel temperature, NSS AASS is 47℃,CASS test is 63℃.

NSS AASS Test:Chamber temperature set 35℃, Pressure barrel temperature set in 47℃(40℃-50℃).

CASS test :Chamber tember temperature set 50℃, Pressure barrel temperature set 63℃(60℃-70℃).

Power switch:Control the whole machine power. Long press for power on or off.

Start/stop switch:Control the heating system of test chamber, heat sink and Pressure barrel.

Spray/pause switch:control the spray system.

Defog switch:control defog system, clear the salt mist in chamber after test.

Test chamber low water alarm:When the water level is low, the light will flicker . Add pure water into the test chamber until the light doesn^,t flicker.

Salt water tank low water alarm:When the salt water level is low, the light will flicker.Add salt water into the salt water tank until the light doesn^,t flicker.

Pressure barrel low water alarm:When the water level is low, the light will flicker.Add pure water into the pressure barrel nutil the light doesn^,t flicker.

Illustration on the back of the salt spray tester

Company information

KOMEG offers the newest and most modern salt fog testing chambers for your testing requirements. KOMEG salt spray test chambers are offered in 60 Liter, 270 Liter, 800 Liter and 960 Liter models and are cost effective solutions to acceleratedcorrosion testing of samples in salt fog. Models have an uncomplicated design that has optimized the openarea to maximize the number of test coupons while providing headroom for testing large and bulky objects