Home Companies KOMEG Technology Ind Co., Limited

Fully Automatic Stainless Steel Temperature Humidity Test Chamber For Electronic Products

KOMEG Technology Ind Co., Limited
Active Member

Contact Us

[China] country

Address: Building 12, Songshan Lake, Small and Medium-Sized Science and Technology Park, Dongguan City, 523808, Guangdong Province, P.R.China

Contact name:KOMEG

Inquir Now

KOMEG Technology Ind Co., Limited

Fully Automatic Stainless Steel Temperature Humidity Test Chamber For Electronic Products

Country/Region china
City & Province dongguan guangdong
Categories Rubber Product Making Machinery Parts
InquireNow

Product Details

 

Fully Automatic Stainless Steel Temperature Humidity Test Chamber For Electronic Products

 

 

Ⅰ. Overview
Able to temperature control accurately and wide range of control, and is suitable for reliability test in industrial products. Meet GB5170.2.3.5.6-95 standard requirements of environmental testing equipment and test methods for the basic parameters of electric and electronic products under the condition of humidity, low temperature, high temperature, and constant heat.
Ⅱ. Application
It is suitable for quality and reliability testing of products, parts and materials under high temperature conditions for electrical, electronic, mechanical and other products, parts and materials.
Ⅲ. Features

● GB-2423.1-2008 (IEC68-2-1) Test A: Low Temperature Test

● GB-2423.2-2008(IEC68-2-2) Test B: High Temperature Test

● GJB360.8-2009(MIL-STD.202F) High Temperature Operating Life Test

● GBJl50.3-2009(MIL-STD-810D) High Temperature Test

● GJBl50.4-2009(MIL-STD-810D) Low Temperature Test

1. user-friendly control

※KOMEG Programmable KM-5166 LCD Touch Screen Controller with PID control parameters setting

※Flexible approach for data collection and recording

2. High reliability

※Key Parts are imported to ensure the service life and high reliability;

※ Efficient oil separator to ensure the compressor life.

Ⅳ. Main Technical Index
1. Temp. Range-40℃~+150℃
2. Temp. Deviation±2.0℃
3. Temp. Uniformity±2.0℃
4. Temp. Fluctuation±0.5℃
5. Heating Rate-70℃ ~ +100℃ Non-linear 2℃/ min (no load)
6. Cooling Rate+20℃ ~ -80℃ Non-linear 1℃/ min (no load)
7.Humidity Range20%~98%R.H.
 

Ⅴ. Body Structure

Interior size

W 200×H 220×D 250 mm

External Size

W 230×H 260×D 425mm(Does not contain the machine protruding part)

External material

High-quality carbon steel plate, the surface for electrostatic color spray treatment

Interior material

stainless steel

Insulation material

150mm rigid polyurethane foam

Floor load bearing

Floor reinforcement, the bottom bearing more than 1500kg

Door

Double doors, door size W(1000+1000)*H2000mm, Windows W460*H560 mm

Threading hole

Open a φ300mm hole in the left side of the chamber, also equipped with rubber isolation plug and plastic cover.

Lighting Device

2 damp-proof lighting , with explosion-proof lampshade
Power distribution control cabinetTotal power circuit breaker, over-temperature protection

Heating

High-quality nickel-chromium alloy wire heater, non-contact control mode (SSR)
Pressure balance portThe test chamber have a type 1 pressure balance port, to ensure the pressure balance of the laboratory inside and outside
 SlopeSlope 1 type, easy access to test items
Ⅵ. Air Conditioning System

Compressor

Germany Bock semi-compact compressor

Refrigerant

Non-fluorine environmental friendly refrigerant: R404a R23, in line with environmental regulations, safe non-toxic

Condenser

Shell-and-tube condenser (water-cooled)

Evaporator

Multi - stage Automatic Load Capacity Adjustment

other attachments

High-precision expansion valve, desiccant, and other components are imported internationally famous brands.

Expansion system

Multi-stage adjustable energy consumption output control of the refrigeration system

Refrigerant flow control

Automatic adjustment of energy consumption output control of the refrigeration system

Refrigeration process

※ Full implementation of nitrogen protection welding, two-stage rotary vane pump vacuum, to ensure that the refrigeration system internal clean,reliable;

※ The bottom of the compressor design water tray, the condensate through the rear of the tank drain to the box outside the box.

Ⅶ. Control System
  1. Sensor
High precision DIN A class, Dry ballφ4.8mm SUS #304 PT 100Ω.
2.Controller

KOMEG Programmable KM-5166 LCD Touch Screen Controller with PID control parameters setting

 

 

 

 

 

 

 

 

3.LanguageChinese / Russian
4.Display Function

Temperature and humidity settings (SV) Practical (PV) value can be displayed directly;

Execution of the program can display numbers, paragraphs, remaining time and cycles, running time display,

Program editing and graphic curve display,

Fixed or program operation status display,

Resolution: 800*480, 7-inch TFT display screen.

5.Display

Resolution

Temperature: + 0.01℃; Humidity: + 0.1%; time: 1min.
6.Setting Range

Temperature conditions:–100~200 ℃;

Temperature can be adjusted based on the working temp. range of the equipment (the upper limit: +5℃, the lower limit : -5℃)

Humidity conditions:0~100 %RH.

7.Operation ModeProgrammable running, constant running
8. Program capacity

Set the running time to reach 9999 h 59 m(Set 0 to constant operation without time limit);

Available program capacity: Up to 1000 groups;

The memory capacity that can be used: Each group of 1000 times (step);

Repeated commands: Each command can be up to 999 cycles.

9. Setting ModeMan - machine dialogue mode,Touch Mode Input and control.
10. Communication Interface

Data collection and curve display when connected to a computer

Can be used as monitoring and remote control system

Multiple machines synchronization control available

RS-232,RS-485 and Ethernet.

11. U Disk Memory Card1G-8G available for downloading historical curve, data, pluggable
12. Data Collection

RAM with battery protection, setting(SV), Practical(PV) and sampling time can be saved;

The curve recording period can be set 10~60 sec. Maximum historical data memory storage is 90 days, historical data(When sampling).

13. Power Off Memory FunctionPower recovery mode can be set as hot start, cold start and stop
14. Pre-set FunctionBoot time can be set freely and machine runs automatically when turning on power
15. Software EnvironmentWindows 2000 or Windows XP
16. Network ConnectionCan be connected to Ethernet via professional software, remote control & assistance function and data collection can be achieved through network, , multiple machine can be controlled simultaneously
Ⅷ. Control panel

a. Emergency stop switch

b. switch

c. Over-temperature protector

d.RS-485 interface

Ⅸ. Protection System

a. Leakage switch;

b. Heater burnout protection switch;

c. Circulating fan over current overload protection;

d. Compressor overpressure protection;

e. Compressor motor overheating protection;

f. Compressor motor over-current protection;

g. Overvoltage owe anti-phase protection

h. Breaker

Ⅹ. Installation Environment

1.Power

 

AC 3ψ4W 380V 50HZ(R.S.T.N add ground wire)( Voltage fluctuation≦±10%)
2.Surrounding EnvironmentGuaranteed operating ambient temperature rang:5〜35℃

PS.1. The above power supply requirements should be assigned to the terminal box of the machine control box, the customer must bring a special device without fuse switch;

2. Above the water demand, please go to the machine host and connected to the host;

3. The machine enters the doorway or the passageway elevator, etc. Please confirm whether it can enter;

4. This offer is only the price of the machine, excluding the cost of the power cord, gas supply, cooling tower and piping works outside the machine.

List of major materials

 

 

 

1Refrigeration compressorGermany Bock semi-compact compressor 
2Oil separatorEmerson , the United States 
3Plate heat exchangerGermany GEA

 

 

4Pressure SwitchDenmark DANFOSS 
5CondenserGuangzhou Yongqiang 
6EvaporatorGuangzhou Yongqiang 
7Dry filterDenmark DANFOSS 
8CapillaryKOMEG 
9Expansion valveDenmark DANFOSS

 

 

10The electromagnetic valveJapanese heron palace,Japanese Nickideu,Denmark DANFOSS 
11ControllerKOMEG 
12breakerSchneider of France 
13AC contactorSchneider of France 
14Thermal relaySchneider of France 
15Phase sequence relaysSwiss Jiale 
16Time RelayAutonics 
17AC relaySchneider of France 
18Solid state relaySwiss Jiale 
 

 

 
 

 

 

Hot Products

Quality Guaranteed Climatic Temperature And Humidity Test Chamber Price Product Description Quality ...
2017 New Products Electronics Climatic Temp.& Humidity Testing Chamber Product Description 2017 New ...
Temperature Controller Climatic Test Chamber For Electronics Products Testing 1. Features ※ Use all ...
Climatic Test Chamber, Temperature Humidity Environmental Test Chamber 1. Standard: GB11158 ...
408L Programmable Climatic Test Chambers , Temperature and Humidity Test Chamber 1. Standard: ...
Precision Climate Test Chamber for Particularly Stable and Homogeneous Test Conditions 1.Product ...