KOMEG Technology Ind Co., Limited |
|
Rapid rate high precise and energy-saving climatic test chamber for PCBA
1. KOMEG Temperature Humidity Test Chamber Heating System:
The T series is a temperature test chamber it is distinguished by its technical advantages as well as its exceptionally attractive
design. With ø 50mm entry port, a RS 232 interface and a multi-color touch panel with 32bit controller. This chamber shows error
in plain text and is free from potential contact for malfunction signal. It has a user friendly structure with a less noise level.
The Temperature Test Chambers, Series T features a multi-color touch panel / 32-bit controller, a lockable double-handed
operated doors handle, a shelf that is made of stainless-steel, and an RS 232 interface. It is a service-friendly type of machine
which projects minimum noise level, and produces a low-powered consumption data.
2. Cooling System
In order to guarantee chamber of cooling rate and minimum
temperature requirements, the chamber of the refrigeration system
cascade refrigeration system consisting of imported compressor, 2
sets for -700C, with two refrigerants,R404A and R23. The
refrigeration system has a reasonable match, high reliability and
easy maintenance.
Design and Application of refrigeration system energy regulation
technology, an effective treatment can guarantee but also on energy
and cooling capacity refrigeration systems can be adjusted in the
case of the normal operation of the refrigeration unit, so that
operating costs of the refrigeration system down to a more state of
the economy.
3. Standard Met and Implemented:
GB/Bb T2423.2-89 high temperature test method
GB2423.1-89 test A: low temperature test method
GJB150.4-1986 test at low temperature
IEC60068-2-1 low temperature test method
IEC60068-2-38 temperature cycle
IEC60068-2-78 constant humidity temperature
MIL - STD - 202G - 103B humidity test
IEC60068-2-30 humidity temperature cycle
GB/T2423.3 constant humidity heat test method
4. Temperature Humidity Test Chamber Parameter Specifications:
The specifications is measured in the environment of + 25 ℃, temperature and humidity performance measurement comply with related regulation of IEC60068-3 standard; Sensors placed in the air outlet.
Model | KMH-1500L | ||||
1500L chamber volume | |||||
Temp. range | -40°C ~150°C | ||||
Display resolution | 0.1°C | ||||
Temperature stability | High±0.5°C ,low ±1.0°C | ||||
Temperature uniformity | ±2.0°C | ||||
Heat up time | -40°C ~+100°C,within 45 min | ||||
Pull down time | +20°C ~-40°C,within 60 min | ||||
Interior Dimension(mm) | W 1500 × D 1000 × H 1000 mm | ||||
Exterior Dimension(mm) | About: W2010 x D1510 x H 2150 mm | ||||
Interior material | Stainless Steel Plate ( SUS 304) | ||||
Exterior material | Baked Painting Steel Or Stainless steel ( SUS304) | ||||
Insulation material | Rigid polyurethane Foam and Glass Fiber Wool | ||||
Total power | 7KW(heater 3KW included) | ||||
Max current | 13.6A | ||||
Ambient Temp. | +5°C ~+35°C | ||||
Power Supply | AC 380V±10% 50Hz ,3 phase 4 wires +Ground Wires | ||||
Weight | 420KG | ||||
Sight window size | 370 X 450mm | ||||
Sample holder | 2 pcs | ||||
Fittings | cable port(portΦ50mm)*1, chamber lamp*1, power cable *2m | ||||
Safety device (standard) | No fuse breaker,over pressure,over heat&over current protect,over temp. protect, over load protect for blower, dry heat protect | ||||
Control System | Balanced Temperature & Humidity Control (BTHC)System | ||||
Refrigeration system | Air Cooled (Water Cooled is option) | ||||
Hermetic compressor | |||||
Single stage refrigeration system, CFC-Free refrigerant(HFC-507/HFC-23) | |||||
Controller | 7-inch LCD Touch Screen panel | ||||
Operation model :Program or fix point running | |||||
Memory capacity :120programs,1200steps, | |||||
All repeat 999 cycles, part repeat 99 cycles | |||||
Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available |
5. Advantages --- Why KOMEG IS Your Right Choice?
Benefits more than you can get from other supplier.
1 Delicate touch and excellent user experience
2. Large glass window design, viewing angle in all directions, hollow electric plating film and anti-condensation design; built-in LED lights to facilitate the test sample state of real-time observation in the course of testing; double door design, the inner big glass door with hand-in holes for the convenient operating.
3. Material quality of inner box is SUS304 # mounted stainless steel imported, and outer box is steel plate and the paint process applies automobile coating technology. Box body is processed shape using Triumph processing machine, its shape is nice and neat.
4. Large-size Full Color LCD touchscreen displayer, simple operation, easy to edit programs. PID with automatic calculation function; self-diagnostic function, show failure message and failure shot solutions step by step.
5. An RS-232 and RS-485 communication interface, matching recorder, strong expandability. We also support remote control by PC via wifi or wire (recommended).
6. Packaging:
Programmable Climatic Test Chambers are covered with air bubble film before put them into the strong plywood case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, crash-proof, etc.