Intelligent touch screen salt Mist test cabinet for anti-corrosion
Salt spray cycling testing chamber is specially designed for the
testing of the corrosion erosion resistance of the products after
their material surfaces have been treated with electric plating,
anodizing, spray coating, anti-rusting oil and other anti-erosion
1. Speed control for the rotating spray nozzles
2. Stationary product shelf - A rotating shelf is optional: see
3. Water pressure regulators, gauges and flow meters
4. Special high-volume floor drain system to rapidly drain water
out of the chamber
5. Interior chamber size is the smallest possible area using the
JIS specified nozzles
6. Rotating rain and spray nozzles designed to JIS specifications
|Inner chamber size W×H×D(cm)||60×45×40||90×60×50||120×80×50||160×100×50||200×100×60|
|Exterior chamber size W×H×D(cm)||107×58×103||138×80×115||170×95×121||225×120×125||265×120×135|
|Temperature range||Box temperature||Room temperature to +50℃,±0.5℃|
|Air saturation barrel||Brine tank temperature~63℃,±0.5℃|
|Brine tank temperature||Brine tank temperature~50℃,±0.5℃|
|Saturated air pressure(kgm2)||0.8~2.0|
|PH value of Copper acetate||3.0~3.2|
|Material||Exterior chamber material||P.V.C＆P.P|
|Interior chamber material||P.V.C＆P.P|
|System||Spraying system||Air acid (base)liquid|
|Heating system||SUS#Stainless steel high-speed heater|
|Controller||Hydrometer,salt meter,mist collector,glass bar|
|Other components||Digital electronic indicator+SSR+PID|
|Safety device||Over-heat protection circuit breaker, dehydration and over-heat
prevention mechanism,overload indicator|
|Power supply||AC 1phase 220V 50/60Hz|
|Customization service||Non-standard or special requirements are all welcome|
1. Can I visit Yuanyao factory? Can your factory arrange
transportation for me?
My dear, it is a great honor to invite you to visit Yuanyao
factory. We can arrange our driver
to pick you up from your hotel when you arrived in Guangzhou City.
2. Can your factory print our brand on the product?
Our factory can laser print customer’s logo on the product with the
permission from customers.
Customers need to provide us a logo usage authorization letter to
allow us to print customer’s logo on the products.
3. Does your factory have the design and development capabilities,
we need the customized
The staffs in our R&D department are well experienced in the
Climate testing industry, with more than 5
years experience. We can make customized products especially for
you; please kindly contact us for more details.
Hope your sincere inquiry.