Active Member
|
[China]
Contact name:Nancy Shen
Guangdong Sanwood Technology Co.,Ltd |
|
|
Climatic Humidity Temperature Test Chamber , Environmental Test Equipment
Temperature and Humidity Test Chamber Basic introduction:
Environmental test chamberr/constant temperature and humidity
chamber simulating product under the condition of temperature and
humidity combination (high and low temperature operation &
storage, temperature cycle, high temperature and high humidity, low
temperature and humidity and condensation test, etc.), check
whether the adaptability and characteristics of the product itself
have changed.
Need to meet the requirements of international standard (IEC, JIS,
GB, MIL...). in order to achieve International quantum measurement
procedures consistency (including test steps, conditions, methods).
To avoid different cognitive, and reduce uncertainly factors scope
of measurement.
Temperature and Humidity Test Chamber Specification:
| Model | SMC-1000-CC | SMC-1800-CC | SMC-2520-CC | SMC-3600-CC | |
| Temperature | Temperature control range | -70℃～180℃ (A:0℃～180℃;B:-20℃～180℃； C:-40℃～180℃;D:-70℃～180℃) | |||
| Temperature fluctuation | ±0.5℃ | ||||
| Cooling rate | 180.0℃～-70.0℃ Within 100 mins 1.0～3.0℃/min | ||||
| Heating rate | -70.0℃～180.0℃ Within 60 mins 3.0～5.0℃/min | ||||
| Temperature uniformity | ±1.5℃ (-40.0℃～100.0℃) | ||||
| ±2.0℃ (100.1℃～180.0℃or-40.0℃～-70.0℃) | |||||
| Humidity | Humidity control range | 10.0%RH～98.0%RH( 60℃ above corresponds to 11%RH ) | |||
| Humidity fluctuation | ±1.0% RH | ||||
| Humidity uniformity | ±2.0％RH | ||||
| Material / components | Internal material | Adopts 1.2mm thickness stainess steel(SUS304) | |||
| External material | Adopts 1.2mm thickness Cold rolled steel sheet / powder spraying | ||||
| Heat insulating material | 100mm thickness polyurethane plate＋10mm thickness mineral wool | ||||
| Fan | Centrifugal blower | ||||
| Compressor | Fully-closed/ Semi-closed | Semi-closed | Semi-closed | Semi-closed | |
| Condenser | Air cooling, water cooling | Air cooling, water cooling | Water cooling | Water cooling | |
| Refrigerant | R404A,R23,R508 | ||||
| Evaporator | Fin - and - Tube Heat Exchanger | ||||
| Heater | Nickel chromium alloy heating wire | ||||
| Humidifier | Steam humidifier | ||||
| Size | Interior size(mm) W*H*D | 1000*1000*1000 | 1000*1500*1200 | 1200*1500*1400 | 1200*2000*1500 |
| Outer size(mm) W*H*D | 1200*1550*2450 | 1200*2000*2650 | 1400*2000*2850 | 1400*2350*2950 | |
| Volume(L) | 1000L | 1800L | 2520L | 3600L | |
| Power supply | 380V AC 50/60Hz | ||||
| Controller | Standard: South Korea TEMI-1500 Optional: South Korea TEMI-2500,South Korea TEMI-2700 | ||||
SANWOOD PRODUCTION
SANWOOD Environmental Chambers was established in 1995, which integrated Taiwan and Japan technologies. We have been focus on the most secure and reliable climatic test chamber technology since established.
OUR EXHIBITION
Our products upgrade constantly and our customers come portable batteries, power batteries, battery, lithium batteries, lead-acid, new energy vehicles, electric bicycles, electric tools, electric systems, solar, military, universities research and other technology industries fields.
CUSTOMER WITNESS
Products are exported to more than 30 countries, such as Russia, Singapore, the United States, Turkey, Denmark, Vietnam, India, Malaysia, Kazakhstan, Austria, Canada, etc.
SANWOOD CULTURE
Sanwood thrived little by little and aims to become the leading brand in the safety and reliability environmental test equipment industry all over the worldber.
