Active Member
|
[China]
Address: No. 7, 1/F, Bldg. C, Jinhui Industrial Park, Jiuxibian Village, Lixin Community, Dongcheng Dist.
Contact name:Doris
ASLi (CHINA) TEST EQUIPMENT CO., LTD |
|
|
Stainless Steel Touch Screen Programmable UV Aging Test Chamber
AC220V
1. Principle and Usage
1.1 UV aging tester adopts fluorescent UV lamp as
light source, by simulating natural light's ultraviolet (UV)
radiation and condensation, accelerated resistant climate test was
carried out on the material, in order to obtain material
weatherability.
1.2 Stainless Steel Touch Screen Programmable UV Aging
Test Chamber AC220V can simulate the ultraviolet ray in natural
climate, rain, high temperature, high humidity , condensation and
dark, etc., environmental conditions,by reproduce these conditions,
merged into a loop, and have it automatically complete cycles, this
is the working principle of ultraviolet aging test chamber.
2. Technical Parameters :
Internal Dimension | W1150×H500×D400 mm |
| ||
External Dimension | W1500×H1500×D550 mm | |||
Temperature Range | (RT+15℃) ～ 70℃ | |||
Humidity Range | ≥90%R.H (only display, can not control) | |||
Temp.Fluctuation | ≤±0.5℃ | |||
Temp. Uniformity | ≤±3℃ | |||
BlackPanel Temp. | 40℃～65℃ | |||
Distance between tubes | 50~500mm±30mm | |||
Distance between specimen and tubes | 75±15mm | |||
Tubes power | 40W, 10 pieces in total, Length:1200mm | |||
UV wave length | 280nm～420nm (fixed, can not adjustable) | |||
Irradiation Range | ≤1w/m2 (adjustable, 0.4~1.4w/m2) | |||
Simulated condensation | condensation system time is adjustable | |||
UV light exposure, simulated condensation time range | 0～99hours ,adjustable | |||
Sample Dimension (coating industry) | 150×75(mm)；(Special specifications prior instructions) | |||
Testing Time | 0~999H Adjustable | |||
3. Mechanical Structure
1) Internal & External Casing Material: SUS#304 Stainless Steel
2) Operating room with 10 imported UV-340 lamps
3) Heating with inside water mode, heat up quick and with uniform
temperature distribution.
4) The door with wo-way or one-way open which depends on the
testing products dimension, easy for opening and closing.
5) Automatic water filling of the inside water wank.
6) Sample shelves made by draft spring or stainless steel which
also depends on the size and shape of the testing products.
7) The bottom of the chamber adopts high quality fixable PU
casters.
8) Drainage system use scroll and U type deposition drainage
devices.
9) 50mm distance between sample surface and the lamps, and parallel
or with 45°angle.
Pictures for reference:
