Active Member
|
[China]
Address: No. 7, 1/F, Bldg. C, Jinhui Industrial Park, Jiuxibian Village, Lixin Community, Dongcheng Dist.
Contact name:Doris
ASLi (CHINA) TEST EQUIPMENT CO., LTD |
|
|
Triple Thermal Shock Chamber Air To Air - 2 Zone Thermal Shock Chamber
Application:
Three and two zone Climate Chamber Thermal Shock Cycle Test
Chamber, Hot Cold Impact Testing Machine is used to test the capability of material structure or composite
materials to withstand the continuous environmental changes between
extremely high temperature and low temperature during a short
period, and therefore understand the chemical changes or physical
damages caused by expansion from heat and contraction from cold in
the shortest possible time. It is applicable to metals, plastic,
rubber, electronics amongst other materials. The test result can be
used as a reference or basis for product improvement.
 |  |
Triple Thermal Shock Chamber Air To Air - 2 Zone Thermal Shock Chamber Technical Parameters:
| Model | TS-42(A~C) | TS-80(A~C) | TS-150(A~C) | TS-252(A~C) | TS-450(A~C) | ||||
Internal Dimension WxHxD ( mm) | 400x350x350 | 500x400x400 | 600x500x500 | 700x600x600 | 800x750x750 | ||||
External Dimension WxHxD (mm) | 1400x1800x1400 | 1550x1950x1550 | 1600x2000x1700 | 1700x2100x1750 | 1800x2200x1900 | ||||
| Temperature Range of Testing zone | Type A:-40 ℃~+150℃ ( 200℃ is Optional) | Type B:-55℃ ~+150℃ ( 200℃ is Optional ) | Type C:-65℃ ~+150℃ ( 200℃ is Optional) | ||||||
High temperature Range of Testing zone: +60ºC~+150ºC ( 200ºC is Optional); Low Temperature Range of Testing Zone: -10ºC~-40ºC / -55ºC / -65ºC | |||||||||
| Exposure Time of High/Low Temperature | Exposure Time of High Temperature: +60℃ ~ +150℃ (200℃ is Optional) 30Mins | ||||||||
| Exposure Time of Low Temperature : -10℃~Type A:-40℃ / Type B -55℃ / Type C -65℃ 30Mins | |||||||||
| Temperature of Heat-Storing Slot / Heating Time | RT~200℃/About 45mins | ||||||||
| Temperature of Cool-storing Slot / Cooling Time | RT~-75℃/ About 100mins | ||||||||
| Temperature Recovery Time / Conversion Time | ≤5min/≤5sec | ||||||||
| Control Accuracy / Distribution Uniformity | ±0.5℃/±2℃ | ||||||||
| Internal and External Material | Material of the inner box is SUS 304# stainless steel,of the outer box is stainless steel or see cold-rolled steel with paint coated. | ||||||||
| Insulation Material | High temperature resistant , high density , formate chlorine , ethyl acetum foam insulation materials | ||||||||
| Mechanics | P.I.D+S.S.R+ Micro-computer balanced temperature control system | ||||||||
| Cooling System | Semi-hermetic double-stage compressor(water-cooled type) /Hermetic double-stage compressor (air-cooled type) | ||||||||
| Security Protection Devices | Non-fuse breaker, high and low pressure protective switch of the compressor , refrigerator high-pressure protective switch , failure warning system, electronic alarm | ||||||||
| Accessories | viewing window(special order) | ||||||||
| Compressor | French 'Tecumseh' Brand, Germany Bizer Brand | ||||||||
| Power | AC220V 1∮ 3 lines ,50/60HZ, AC380V 3∮ 5 lines ,50/60HZ | ||||||||
| Weight (Approx) | 450 | 600 | 750 | 950 | 1200 | ||||
Triple Thermal Shock Chamber Air To Air - 2 Zone Thermal Shock Chamber Features:
1.It is divided into three zones: high temperature zone, low
temperature zone, and testing zone. The test sample is in static
mode.
2.Using touch-control graph control as operation interface, easy to
operate.
3.Applying wind route conversation to the shock method to
distribute temperature to the testing zone for cold and thermal
shock measurement.
4.For high temperature shock or low temperature shock, max. time is
up to 999H, and max. circulation cycles are 9999 times.
5.The system can be used for automatic Circulation Shock or manual
selective shock.
6.Adopt binary cooling system, with quick cooling effect. Cooling
method is water cooling.
7.Can entering normal temperature. RS-232 and RS-485 communication.
Operating Principle:
The Controller Interface:
Short introduction about ASLi factory:
We are a long history testing equipment manufacturer, in the past
28 years, we devoted to simulation environmental testing equipment
and Mechannical vibration and shock testing machine. Three
Zone Thermal Shock Test Chamber, PCB Environmental Thermal Shock
Testing Machine is our star products , and we had obtained the CE
certification for this machine.
Warranty: one year free warranty for whole set machine,lifelong time maintainance.
After-sale service: feedback within 8 hours after get the call or email.
Service:OEM service,Design service,Buyer lable service.
Certificate of these the machine:
China official 3rd party calibration report
CE certiification
For the package:
1. PP film first
2. Vacuum package
3. PP film again
4. 10mm thickness PU foam to avoid collision
5. stronged plywood case
6. Standard ASLI CASE MARK
