87L Capacity Pressure Cooker Test Chamber / Environmental Test Chamber

Stainless Steel Plate Steam Aging Tester, High Pressure Aging Testing Chamber

Application:

Stainless Steel Plate Steam Aging Tester, High Pressure Aging Testing Chamber is widely applied for the testing of sealing property for multi-layer circuit board, IC sealing package, LCD screen, LED, semi-conductor, magnetic materials, NdFeB, rare earths and magnet iron, in which the resistance to pressure and air tightness for above mentioned products can be tested out.

High Pressure Aging Testing Chamber Technical Parameters:

Model	PCT - 25	PCT - 35	PCT - 45		PCT - 55	PCT - 65
Internal Dimension Φ×D (mm)	300×250	350×450	450×550		550×650	650×750
External Dimension W×H×D (mm)	750×1200×800	800×1250×800	900×1380×900		1050×1550×1100	1200×1700×1250
Temperature Range of Saturated Steam (Operating temperature)	(Temperature Range of Saturated Steam:100℃~135℃) , Temperature Range: 120℃,100Kpa/ 133℃ 200 Kpa; (143℃ is special order)
Relative Pressure/ Absolute Pressure	Relative pressure: display values indicated on the pressure gauge Absolute pressure: Value that add 100 Kpa based on display values indicated on the pressure gauge (The actual value in the inner box)
Comparison Table of Temperature, Humidity , Pressure of Saturated Steam
Humidity of Saturated Steam	100%RH saturation steam humidity
Steam Pressure (Absolute Pressure)	101.3Kpa +0.0Kg/cm2 ~ 2.0Kg/cm2 ; (3.0Kg/cm2 is special standard)
Recursive Device	Steam Natural convection circulation
Safety Protective Devise	Water short storage protect, over pressure protect.(have automatically/manual water replenishing, automatically discharge pressure function )
Accessories	Two layers stainless steel plate
Equipment Capacity (L)	17	43		87	155	250
Power	AC 220V(±10%), 1∮ 3 Lines ,50/60HZ ;

Stainless Steel Plate Steam Aging Tester Features:

1. Automatic adding water function, and automatic filling water upon the water short storage while testing.

2. Automatic operation to test process finished, easy to use.

3. Temperature control: LED digital temperature controller can make accurate testing of temperature setting, control and display.

4. LED digital timer, when the inner box’s temperature reached the setting value, then start to time to ensure the test complete.

5. Accurate pressure: temperature chart always shows the inner box’s pressure and relative humidity.

6. Water device is automatically discharge not saturated steam in order to achieve the best steam quality.

7. A integrated silic gel door gasket, air tightness is very good, and long operation life.

8.The inner box is mirror-polished , graceful and non-pollution

Safety Device:

1. Safety device for the pot: If the inner box is not closed , the machine can not start
2. Safety Valve: When the inner box’s pressure higher than the machine’s undertake value, it will self-relieve.
3. Double overheat protection device: When inner box’s temperature is too high, it will alarm, and Automatic cut off the heating power.
4. Cover protection: The inner box’s cover is made of aluminum alloy, can protect the worker from scald.

Mechanical Structure:

1. Circular inner box with material of stainless steel, complied with industrial safety standards,able to avoid phenomenon like moisture condensation or water dripping.
2. Inner box with arc type design avoid direct shock caused by over steam temperature.
3. Precision design,good air tightness , low water consumption, automatic water supply and each time able to run for 999h.
4. Automatic door guard, round door with auto temperature and pressure safety check,auto lock the control system. Adopt safety door handle design,when inner pressure larger than normal pressure the door will be anti locked, thus protect the operator.
5. Before testing, the vacuum will help move all the air out of the inner box, and filting, packing＜1micom, ensure the purity of the inner box.
6. Critical point LIMIT type auto safety protection, fault or un-normal with light display.
7. The machine with timely drying function, let the testing sample in drying state.
8.Auto and manual water supply；no need to stop the testing ; when testing finished the machine will automatically purging pressure.

Control System:

1.Micro-computer saturated steam LED digital display temperature controller, LED digital time controller and pointer type pressure display gauge.
2. This system complied with high pressure accelerated aging reliability test standards as : CNS,ISO,JIS,ASTM,DIN.. BS,IEC, NACE,UL,MIL…
3.Control object: micro computer +P.I.D. +S.S.R. Automatic calculating saturated steam temperature.
4. Micro-computer control.

Customers' Visit ASLi Factory:

Warranty: one year free warranty for whole set machine,lifelong time maintainance.

After-sale service: feedback within 8 hours after get the call or email.

Service:OEM service,Design service,Buyer lable service.

Certificate of these the machine:

China official 3rd party calibration report
CE certiification
 

For the package:

1. PP film first
2. Vacuum package
3. PP film again
4. 10mm thickness PU foam to avoid collision
5. stronged plywood case
6. Standard ASLI CASE MARK