|
[China]
Trade Verify
Address: No.2, Zhifu Road, Mowu, Wanjiang District, Dongguan, Guangdong, China
Contact name:Vickey Jin
Dongguan Liyi Environmental Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
LIYI Simulate Battery Squeeze And Puncture Equipment Battery Extrusion Needling Test Machine
Product overview:
The battery extruding and needling machine is applicable to simulate the situation of battery being squeezed and punctured when various batteries are used, transported, stored or treated with household wastes.
The extrusion direction of extrusion test shall comply with the following rules: one battery is extruded only once, and the battery is qualified if it does not explode or ignite.
1. For cylindrical batteries, the longitudinal axis of the extruded battery shall be parallel to the two flat plates of the extrusion device;
2. For square and soft packed batteries, only the wide surface of the battery shall be squeezed;
3. For coin type or button type batteries, the upper and lower planes of the battery shall be pressed parallel to the flat plate. The needling test shall be carried out under the environment of 20 ℃± 5 ℃. The battery shall be placed on the clamp and the diameter of φ 3- φ An 8mm non-corrosive steel needle is inserted into the center of the battery surface at the speed of 10mm / s-40mm / s, and the test results are observed at any time. The battery is qualified if it does not explode or ignite. The battery extrusion tester complies with gb31241-2014 and other standards.
According to standard:
GB 31241-2014,GB/T 8897.4-2008,YD/T 2344.1-2011,GB/T 21966-2008,MT/T 1051-2007,YD 1268-2003,GB/T 19521.11-2005,YDB 032-2009,UL 1642,UL 2054,IEC 62281,IEC 60086
Specifications:
| Specifications | Parameter |
| Environmental requirements for equipment use | Temperature below 45 ℃, humidity below 80% |
| Power Supply | AC220V,50/60Hz |
| source of water | nothing |
| vacuum | nothing |
| compressed air | nothing |
| Ground requirements and bearing requirements | Concrete ground, ≥ 600kg, |
| Network requirements | nothing |
| Construction requirements for smoke, dust, waste gas and wastewater treatment plant | Exhaust gas discharge port diameter: 100mm |
| Accepted Delivery Terms: | FOB, CFR, CIF, EXW, DDP |
| Accepted Payment Currency: | USD, EUR, HKD, CNY |
| Accepted Payment Type: | T/T, L/C, Credit Card, PayPal, Western Union, Cash, Escrow |
| Nearest Port: | Shenzhen, Guangzhou, Shanghai, Qingdao, Tianjing or rquired |
