|
[China]
Trade Verify
Address: No.2, Zhifu Road, Mowu, Wanjiang District, Dongguan, Guangdong, China
Contact name:Vickey Jin
Dongguan Liyi Environmental Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
LIYI Touch Screen Thermal Cycling Chamber 80L 3 Zone Thermal Testing Equipment
Machine introduction:
LIYI Air Cooled 3 Zone High Low
Temperature Impact Thermal Shock Test Chamber is metal,
plastic, rubber, electronics and other industries necessary testing
equipment. For the continuous exposure to extremely high
temperature, very low temperature environment, instant exposure of
the material structure or composite material tolerance, can be
detected in the shortest possible time due to thermal expansion and
contraction caused by chemical or physical damage.
It meets today's environmental stress
screening requirements and is proven in installations around the
world. It's an economical way to achieve ESS or thermal shocks for
rapid component temperature changes.
The thermal shock chamber of this type is provided with three dampers, i.e., one for opening or closing the gas outlet and intake of the high-temperature air conditioning unit, another for the air outlet and inlet of the outside air supplying unit, and another for the gas outlet and intake of the low-temperature air conditioning unit.
Standards:
1.GB/T2423.1-1989
2.GB/T2423.2-1989
3.GB/T2423.22-1989
4.GJB150.5-86
5.GJB360.7-87
6.GJB367.2-87 405
7.SJ/T10187-91Y73
8.SJ/T10186-91Y73
9.IEC68-2-14
10.GB/T 2424.13-2002
11.GB/T 2423.22-2002
12.QC/T17-92
13.EIA 364-32
Specifications:
| Model | LY-TS-42 | LY-TS-80 | LY-TS-150 | LY-TS-225 | LY-TS-300 |
| Inner Size(cm) | 40×35×30 | 40×50×40 | 50×60×50 | 50×75×60 | 100×60×50 |
| Temperature Range | High temperature: +60°C~+150°C (or 180°C) Low temperature: -10°C~-40°C (or -40°C, -50°C,-60°C, -70°C) | ||||
| Temperature Deviation | Less than ±2°C | ||||
| Temperature Conversion Time | Less than 10S | ||||
| Temperature Recovery Time | Less than 5min | ||||
| Test method | 2 zone type or 3 zone type | ||||
| Cooling System | Water-cooled / air-cooled(small chambers only) | ||||
| Power | AC380V/50HZ Three-phase | ||||
Since the cold chamber need huge cooling capacity for shocking, the chamber’s cooling mode is often designed as air-cooled or water-cooled.
Air-cooled type need installation environment:
The room must be equipped with exhauster and air conditioner to
make sure heat dissipation timely.
It’s applied to small power products and cool areas.
Water-cooled type need installation conditions:
The customer must prepare water pipe and water tower (located
outside) accordingly.
The water must be pure, or it will block the pipes and result in
some maintenance trouble with time going.
It’s often applied to large system with the features of better heat
dissipation, longer service time, low noise but slightly higher
price if count the fee of water tower and water pipes.
Our service:
During the whole business process, we offer Consultative Selling service.
1)Customer inquiry process:
Discussing testing requirements and technic details, suggested suitable products to customer to confirm. Then quote most suitable price according to customer requirements.
2)Specifications customize process:
Drawing related drawings to confirm with customer for customized requirements. Offer reference photoes to show the proucts appearance. Then, confirm the final solution and confirm final price with customer.
3)Order process:
We offer below business term:
| Accepted Delivery Terms: | FOB, CFR, CIF, EXW, DDP |
| Accepted Payment Currency: | USD, EUR, HKD, CNY |
| Accepted Payment Type: | T/T, L/C, Credit Card, PayPal, Western Union, Cash, Escrow |
| Nearest Port: | Shenzhen, Guangzhou, Shanghai, Qingdao, Tianjing or rquired |
4)Production and delivery process:
We will produce the machines according to confirmed PO requirements. Offering photoes to show production process.
After finish production, offer photoes to customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing.
Deliver the products in confirmed shipping time and inform customer.
5)Installation and after sale service:
Defines installing those products in the field and providing after-sales support.
