LW-01 Water Decoloring Agent
Brief Introduction of Water Decoloring Agent
- This product is a quaternary ammonium cationic polymer.
- CAS No.:55295-98-2 MF:(C4H8N5X)n
Main Application Fields
- It is mainly used for waste water treatment for textile, printing,
dyeing, paper-making, mining, ink, and so on.
- It can be used for color removal treatment for high-colority waste
water from dyestuffs plants. It is suitable to treat waste water
with activated, acidic and disperse dyestuffs.
- It also can be used in the production process of paper & pulp
as retention agent.
Basic Characteristics
- Strong decolorization(80%-99.9%)
- Removal of COD&BOD(50%-90%)
- Faster sedimentation, better flocculation
- Non-pollution(no aluminum, chlorine, heavy metal ions ect.)
Specification
Item | LW-01 |
Main Components | Dicyandiamide Formaldehyde Resin |
Appearance | Light or light-yellow liquid |
Dynamic viscosity (cps,20°C) | 20~250 |
pH (30% water solution) | 2.5-5.0 |
Solid content % ≥ | 50 |
Note: our product can be made upon your special request. |
Application Method
- The product shall be diluted with 10-40 times water and then dosed
into the waste water directly. After being mixed for several
minutes, it can be precipitated or air-floated to become clear
water.
- The pH value of the waste water should be adjusted to 7~8 for
better result.
- When the colority and CODcr are relatively high, it can be used
with the help of polyaluminum chloride, but not mixed together. In
this way, the treatment cost can be lower. Whether polyaluminum
chloride is used earlier or afterwards depends on the flocculation
test and the treatment process.
Package & Storage
- It is harmless, non-flammable and non-explosive, it can not be
placed in the sun.
- It is packed in plastic drums with each containing 30kg, 50kg,
250kg , 1000kg, 1250kg IBC tank or others according to your
requirements.
- This product will appear layer after a long-term storage, but the
effect will not be affected with stir. Storage temperature:
5-30°C