|
[China]
Trade Verify
Address: Room No.5, 15th Floor, Yuyang Plaza, Bayiqizhong Rd, Fuzhou, P. R. China
Contact name:
JINHUA (QINGDAO) HARDFACING TECHNOLOGY CO., LTD. |
|
Verified Suppliers
|
|
|
Automation Welding System for Hydraulic Cylinder, Hydraulic Cylinder Flange Automatic Welding Machine
I. Machine Instruction
Workpiece Loading & Unloading Method: Manual
Locating Method of The Workpiece: Self-centering chuck in the left
clamp the workpiece to locate the center of rotation by manual. Two
supporting racks locate the center of the workpiece and rotate
together with the workpiece coaxially. Pneumatic tailstock is
equipped in the right end, the centre of the tailstock sustain the
workpiece gyration.
Methods For Welding: Single torch gas shielded arc welding,
automatic single-layer welding or multi-layer welding can be
achieved once. Single-layer & single-pass welding, multi-layer
& single-pass welding, multi-layer & multi-pass welding can
be achieved full automatically.
The one end of the workpiece must be clamped and another end has an
inner bore. The outer diameter can be supported by the contact
rollers to locate the centre of the workpiece. (can weld workpiece
while only the chuck clamp it directly or the chuck clamp it and
the tailstock press it or the chuck clamp it and the contact
rollers support it)
II. Main Technical Parameters
| Model Name | HF4000 |
| Rated Load Capacity | 3T |
| Workpiece Length Range | ≤3000mm |
| Workpiece Diameter Range | φ50-φ500mm |
| Rotating Speed of The Main Spindle | 0.19-2.2r/min |
| Elevating Stroke of The Torch | 300mm |
| Manual Adjusting Range of The Torch | X:≥50mm Y:≥50mm |
| Turnover Angle of The Workpiece | 360° |
| Pressure of The Compressed Air | 0.3～0.6MPa |
| Rated Welding Current | 500A |
| Welding Centre Height | 950mm |
III. Main Components List
| Discription | Manufacturer |
| PLC | Mitsubishi |
| Touch Screen | Mitsubishi |
| Electrical Element | Schneider / Siemens |
| Pneumatic Element | AirTAC, Taiwan |
| Linear Guide Rail | HIWIN, Taiwan |
| Inverter | Taian, Taiwan |
| Main Spindle Reducer | Tongli, China |
| Stepping Motor | Mitsubishi |
| Movement Reducer | Tongli, China |
| Oscillator Motor | Mitsubishi |
IV. Pictures
