Active Member
|
[China]
Address: Suolide Science & Technology Industry Park, No.151, East Chunhui Road, Wuxi, China
Contact name:Patrick
Serve Real Instruments Co.,Ltd |
|
|
Standards: IEC60695 -11-5,GB/T5169.5-2008,GB4706.1-2005
This test chamber is used to simulate the effect of small flames which may result from fault conditions within the equipment, in order to assess the fire hazard of electric products. Touch screen operation, gripper controlled by motor, auto movement of Bunsen burner.
Features
Programmable touch screen controller+PLC control, highly automation through whole process
Automatic recording of burning time
Automatic recording of test time and generate test report
Automatic testing and independent air extraction
Black background with illumination ≤20Lux
Flame calibration set optional
Air flow adjustable(precise flow valve)
Specifications
| Needle burner: | Inner hole Φ 0.5mm ± 0.1mm, outer dia. ≤Φ 0.9mm, length ≥ 35mm |
| Burner flame angle: | 0- 45°( free adjustment ) |
| Ignition time | 0-999.9s±0.1s, freely adjustment(flame auto movement) |
| Burning time | 0-999.9s±0.1s, auto recording, manual stop |
| Flame height | 12mm ± 1mm (with height ruler) |
| Needle height | >35mm(inner dia. Ф0.5, outer dia. Ф0.9) |
| Burning gas | 95% butane gas( bottled liquefied petroleum gas optional) |
| Temperature measure range | 0~1000℃ |
| Flame temperature rise rate | The time from 100 ℃ ± 2 ℃ to 700 ℃ ± 3 ℃ is within 23.5 seconds ± 1 second |
| Thermocouple | Φ0.5mm (K type) Ni-Cr / Ni-Al wire thermocouple, insulated to ground |
| Heat transmission copper block | Ф4.0x6.0mm |
| Burning gas alarm system | Optional |
| Overall size | W1160mm×D600mm×H1310(including foot)mm(0.75CBM or 1CBM SUS enclosure optional) |
| Test area size | ＞0.5CBM, L900mm×W590mm×H1050mm |
