DIRECTIONS FOR USE
Allow the test, urine specimen, and/or controls to reach room
temperature (15-30°C) prior to testing.
1. Bring the pouch to room temperature before opening it. Remove
the test card from the sealed pouch and use it within one hour.
2. With the arrow pointing toward the urine specimen, immerse the
test dipstick vertically in the urine specimen in such a way that
urine does not cross MAX line on the test Dipstick for 10-15
seconds. See the illustration below.
3. Place the Test Dipstick on a non-absorbent flat surface, start
the timer and wait for the colored line(s) to appear. Read results
at 5 minutes. Do not interpret the result after 10 minutes.
INTERPRETATION OF RESULTS
(Please refer to the illustration above)
NEGATIVE:* Two colored lines appear. One colored line should be in
the control line region (C), and another apparent colored line
should be in the test line region (T). This negative result
indicates that the Desmethylcitalopram concentration is below the
detectable cut-off level.
*NOTE: The shade of color in the test line region (T) may vary, but
it should be considered negative whenever there is even a faint
colored line.
POSITIVE: One colored line appears in the control line region (C).
No line appears in the test line region (T). This positive result
indicates that the Desmethylcitalopram concentration exceeds the
detectable cut-off level.
INVALID: Control line fails to appear. Insufficient specimen volume
or incorrect procedural techniques are the most likely reasons for
control line failure. Review the procedure and repeat the test with
a new test. If the problem persists, discontinue using the test kit
immediately and contact your local distributor.
Order Information
Cat. No. | Product | Specimen | Pack |
DCIT-102 | CIT Rapid Test Cassette | Urine | 25T |
DCIT-114 | CIT Rapid Test Panel | Urine | 25/40T |
DCIT-101/111 | CIT Rapid Test Dipstick | Urine | 50T |