Allow the test, urine specimen, and/or controls to reach room
temperature (15-30ºC) prior totesting.
1. Bring the pouch to room temperature before opening it. Remove
the test panel from the sealedpouch and use it within one hour.
2. Remove the cap.
3. With the arrow pointing toward the urine specimen, immerse the
test panel vertically in the urinespecimen for at least 10 to 15
seconds. Immerse the dipstick to at least the level of the
wavylines, but not above the arrow on the test panel.
4. Replace the cap and place the test panel on a non-absorbent flat
surface.
5. Start the timer and wait for the colored line(s) to appear.
6. Read the adulteration strips and Alcohol strip between 3-5
minutes according to color chart providedseparately/on foil pouch.
Refer to your Drug Free Policy for guidelines on adulterated
specimens.We recommend not to interpret the drug test results and
either retest the urine or collect another specimen in case of any
positive result for any adulteration test.
7. The drug strip result should be read at 5 minutes. Do not
interpret the result after 10 minute.
.
Applications and Description:
The Multi-Drug Rapid Test Panel is a rapid surfaces or solids
screening test that can be performed without the use of an
instrument. The test utilizes monoclonal antibodies to selectively
detect elevated levels of specific drugs on surfaces and in solids.
Methylenedioxymethamphetamine (ecstasy) is a designer drug first
synthesized in 1914 by a German drug company for the treatment of
obesity.. Those who take the drug frequently report adverse
effects, such as increased muscle tension and sweating. MD/MA is
not clearly a stimulant, although it has, in common with
amphetamine drugs, a capacity to increase blood pressure and heart
rate. MD/MA does produce some perceptual changes in the form of
increased sensitivity to light, difficulty in focusing, and blurred
vision in some users. Its mechanism of action is thought to be via
release of the neurotransmitter serotonin. MD/MA may also release
dopamine, although the general opinion is that this is a secondary
effect of the drug (Nichols and Oberlender, 1990). The most
pervasive effect of MD/MA, occurring in virtually all people who
took a reasonable dose of the drug, was to produce a clenching of
the jaws.
How to use?
Test device (in closed pouches), samples, and controls should be
brought to room temperature (15-30°C) prior to testing. Do not open
pouches until ready to perform the assay.
Remove the test device from its protective pouch and label the
device with patient’s identification or control label.
FOR SURFACES
1. Wipe with the strips over the surface in which the drugs are
expected.
2. Take off the cap of supplied tube;
3. Fill all buffers from the supplied tube of buffer into the
protection cover.
4. Insert the Multi Test slowly and carefully into the protection
cover with buffer
5. Wait for lines to appear on the membrane and read the results
after 5 minutes and do not interpret the result after 10 minutes.
FOR SOLIDS
1. Open the tube and put the solid in to the buffer.
2. Close the tube with dropper and cap. Shake it a short time. Wait
for 30 sec.
3. Take off the cap of supplied tube;
4. Fill all buffers with dissolved substances into the protection
cover.
5. Insert the Multi Test slowly and carefully into the protection
cover with buffer.
6. Wait for lines to appear on the membrane and read the results
after 5 minutes and do not interpret the result after 10 minutes.
Order Information:
Cat. No. | Product | Specimen | Pack |
DOA-124~1204 | Multi-Drug 2~20 Drugs Rapid Test Panel | Urine | 25 T |
DOA-X24~X164 | Multi-Drug 2~16 Drugs Rapid Test Panel | Powder | 25 T |