Home Companies RULETEAM CONNECTION TECHNOLOGY (SHENZHEN) CO.,LTD

Phosphor Bronze Pitch 1.0mm Wire To Board Connectors Dual Row With PA46 Material

Contact Us

[China]

Trade Verify

Address: No.A1507H2 Xinhe Century Building, 3069 Caitian Rd, Gangxia Community, Futian District, Shenzhen City, China

Contact name:Ricky Zou

RULETEAM CONNECTION TECHNOLOGY (SHENZHEN) CO.,LTD

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Phosphor Bronze Pitch 1.0mm Wire To Board Connectors Dual Row With PA46 Material

Country/Region	china
City & Province	shenzhen guangdong
Categories	Terminals

Product Details

1.0mm Pitch White Wire To Board Connectors Dual Row With PA46 Material

1, Detailed specification of product:

1. Basic information:

Color: White
Housing Material: Nylon46
Flammability: 94V-0
Pitch: 1.00mm
Circuits: 20 30 40positions
Insulation O.D.: 0.80mm
Mounting type: wire to board
Application: Signal, wire to board
Terminal materials: Phosphor bronze
Finish terminal: gold-flash type
Terminal Package: 15K pcs/reel
Suitable terminal: A1004 series
Terminal processing method: E-stamping before tin-plated

2. Electrical characteristic:

Current Rating: 1A AC DC
Voltage Rating: 50V AC, DC
Contact Resistance: 20mΩ Max
Insulation Resistance: 100mΩ
Withstanding Voltage: 500V AC/minute

3. Mechanical characteristic:

Temperature Range:-25°C ~+85°C
Terminal Insertion Force: 0.50kgf (Max.)
Terminal/Housing Retention Force: 0.50kgf (Min.)
Pin Retention Force: 0.50kgf (Min.)

Other detailed data please check the pictures as below.

2, Introduction for this series products

Please kindly notice these series product, you can buy it as a set, then we will offer you reasonable price.

A1004 series product
Terminal	A1004-T

Housing	Dual rows type	A1004H-2XNP & A1004-2XNP-1 & A1004-2XNP-2

3, Corresponding engineering drawing & test report

Below file is our engineering drawing and testing report for further information. It's sure that it will be a

good reference for you to know this series parts clearly.

Drawing of dimension

3. Ratings & Applicable Wires

Item	Standard
Rated Voltage (Max.)	50V AC/DC		Insulation O.D. 0.80mm (Max.)
Rated Current (Max.) And Applicable Wires	AWG#28	1A AC/DC
	AWG#30	1A AC/DC
	AWG#32	0.5A AC/DC
Ambient Temperature Range	-25℃ ~ +85℃*

*: Including terminal temperature rise

4. Electrical Performance

Test Description		Procedure	Requirement
4-1	Contact Resistance	Mate connectors, measure by dry circuit, 20mV max., 10mA.(Based upon JIS C5402 5.4)	20mΩ (Max.)
4-2	Insulation Resistance	Mate connectors, apply 500V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 Method 302 Cond. B)	100MΩ (Min.)
4-3	Dielectric Withstanding Voltage	Mate connectors, apply 500V AC (rms) for 1 minute between adjacent terminal or ground. (Based upon JIS C5402 5.1/MIL-STD-202 Method 301)	No Breakdown.
4-4	Contact Resistance on Crimped Portion	Crimp the applicable wire on to the terminal, measure by dry circuit, 20mV (Max.)., 10mA.	5mΩ (Max.)

5. Mechanical Performance

Test Description		Procedure	Requirement
5-1	Actuator Insertion & Withdrawal Force	Insert and withdraw connectors at the speed rate of 25±3mm / minute.	Refer to paragraph 7
5-2	Crimping Pull Out Force	Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8)	AWG#28	1.6kgf (Min)
			AWG#30	0.8kgf (Min)
			AWG#32	0.5kgf (Min)
5-3	Terminal Insertion Force.	Insert the crimped terminal into the housing.	0.50kgf (Max.)
5-4	Terminal/Housing Retention Force.	Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing.	0.50kgf (Min.)
5-5	Pin Retention Force	Apply axial push force at the speed rate of 25±3mm / minute	0.50kgf (Min.)
5-6	Durability	When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute.	Contact Resistance 40mΩ (Max.)
5-7	Vibration	Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A)	Appearance No Damage. Contact Resistance 40mΩ (Max.) Discontinuity 1 μsec.(Max.)
5-8	Physical Shock	490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A)

4, FAQ

Q1: Are you manufacturer or trading company?
A: We are a manufacturer with 12 years experience professional manufacturing company which specializes in producing, research and development, sales of variety of electronic connectors, terminals, wafer etc.

Q2: How to control the quality of your products?
A: Quality is life of our company. The QC staff control each procedure as per ISO9001 program. All part are100% tested before shipping.

Q3: Where is your factory located, and how can we visit there?
A: Our company is located in Dongguan city, Guangdong Province, China. It is close to shenzhen

Q4: How can I get the sample?
A: The sample is for free,but the transportation fee will be beared by customers.

Q5: What are your products applied to?
A: Our products are applied to automotive use, conmmunication equipment, industrial use, household appliance, electronics, etc.

Hot Products

wire harnesses with 0.8mm pitch compatible SUR connectors IDC cables with hot shrink sleeve

Contact Us

RULETEAM CONNECTION TECHNOLOGY (SHENZHEN) CO.,LTD

Phosphor Bronze Pitch 1.0mm Wire To Board Connectors Dual Row With PA46 Material

Product Details

Hot Products

wire harnesses with 0.8mm pitch compatible SUR connectors IDC cables with hot shrink sleeve

6.35mm Pitch Compatible Amp 480700 Connector Wire Harnesses Power Cables with AWG26#

ROHS Wire Harnesses for Electronics Device with 3.96mm Pitch VH Connector Compatible JST Connectors

Discrete Wire Harness Assembly 3.0mm Pitch Micro-Fit 3.0 Connector System

customized wire harness with crimp terminal 110 series terminals for automotive device

OEM&ODM Rohs compliant Led light bar cable wire harness with molex connectors