IDC Connectors with 3 circuits 0.8mm pitch, SUR PCB connector with gold-flash Contact

1, Detailed specification:

        1. Basic information:

• Color: Cream
• Row No.: Single
• Circuits: 2pin to 22pin
• Insulation O.D.: 0.39mm(AWG32#)
• Matched parts: A0800HI series housing
• Pin material of wafer: Phosphor Bronze or Tin-plated
• Solder tabs:Phosphor Bronze or Tin-plated
• Wafer:standard type:Nylon 9T UL94V-0(cream); Halogen free:LCP UL94V-0
• Mounting Type: SMT Mounting

        2. Electrical characteristic:

• Current Rating: 0.5A AC,DC(AWG#30);0.2A AC, DC(AWG#36)
• Voltage Rating: 30V AC, DC
• Contact Resistance: 20mΩ Max
• Insulation Resistance: 100mΩ
• Withstanding Voltage:  200V AC/minute

        3. Mechanical characteristic:

• ​​Temperature Range:-25°C ~+85°C
• Terminal/Housing Retention Force:0.25kgf (Min.)
• Pin Retention Force:0.25kgf (Min.)

                    Other detailed data please check the below pictures.

 2, Related engineering drawing and testing report

The attached picture is our standard engineering drawing and report for your reference, it will help you to 

know our product feature, then you can choose the right models.

                                                             Simplified  Dimension Drawing                                                    

                                                                 Testing report                                                                             

5. Mechanical Performance

 

Test Description		Procedure	Requirement
5-1	Actuator Insertion & Withdrawal Force	Insert and withdraw connectors at the speed rate of 25±3mm / minute.	Refer to paragraph 7
5-2	Wire pull Out Force	Pulling load shall be applied to a correctly terminated wire in parallel and perpendicular directions. The load to pull the wire out of the socket or break the wire shall be measured.	Parallel direction	Perpendicular direction
			0.30 kgf(Min.)	0.15 kgf(Min.)
5-3	Terminal/Housing Retention Force.	Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing.	0.25kgf (Min.)
5-4	Pin Retention Force	Apply axial push force at the speed rate of 25±3mm / minute	0.25kgf (Min.)
5-5	Durability	When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute.	Contact Resistance 40mΩ (Max.)
5-6	Vibration	Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A)	Appearance No Damage. Contact Resistance 40mΩ (Max.) Discontinuity 1 μsec.(Max.)
5-7	Physical Shock	490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A)

4, Application field of this part

These series part are ideal for most of household appliance, computer, communication device. We also can controll defective rate in a low value, so our parts are accepted by famouse and international company like TPV, LeTV, Emerson, Amphenol Corporation, Skyworth, LuXshare, BYD etc. And the all products are certificated by REACH, UL, RoHS. In order to protect the evironment, some parts are halogen free.