Home Companies RULETEAM CONNECTION TECHNOLOGY (SHENZHEN) CO.,LTD

1.0mm pitch FI-X gold-flash crimp terminals with phosphor bronze material for AWG30# to 34#

Contact Us

[China]

Trade Verify

Address: No.A1507H2 Xinhe Century Building, 3069 Caitian Rd, Gangxia Community, Futian District, Shenzhen City, China

Contact name:Ricky Zou

RULETEAM CONNECTION TECHNOLOGY (SHENZHEN) CO.,LTD

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

1.0mm pitch FI-X gold-flash crimp terminals with phosphor bronze material for AWG30# to 34#

Country/Region	china
City & Province	shenzhen guangdong
Categories	Terminals

Product Details

5.08mm ptich wire to wire and wire to board Crimp Terminal,#18 - #24 AWG,gold plating terminals C5080M-T-A

1, The specification of the product including basic size information, electrical and mechanical properties.

Basic size information
Termination Interface Style		Crimp
Processing methods		E-stamping before Gold-flash
Insulation O.D.		0.60mm(Max)
Part No.		A1006-GPE
Application		Signal, PCB board

Electrical properties
Current Rating		1A AC, DC
Voltage Rating		200V AC, DC
Contact Resistance		40mΩ Max
Insulation Resistance		100MΩ min
Withstanding Voltage		500V AC/minute

Mechanical properties
Temperature range		-25℃ to 85 ℃
Other information please kindly check the following picture.

2, Related drawing and report

The following pictures are engineering drawing and testing report for your reference, wish these can help you to purchase the ideal and right parts from us. Thank you!

1. Scope

This specification covers the requirements for product performance of 1.00mm pitch wire to board

connectors series.

2. Construction,Dimensions,Material & Plating

See the attached drawings

3. Ratings & Applicable Wires

Item	Standard
Rated Voltage (Max.)	200V AC/DC		Insulation O.D. 0.60mm (Max.)
Rated Current (Max.) And Applicable Wires	AWG#30	1A AC/DC
	AWG#32	0.8A AC/DC
	AWG#34	0.5A AC/DC
Ambient Temperature Range	-25℃ ~ +85℃*

*: Including terminal temperature rise

4. Electrical Performance

Test Description		Procedure	Requirement
4-1	Contact Resistance	Mate connectors, measure by dry circuit, 20mV max., 10mA.(Based upon JIS C5402 5.4)	35mΩ (Max.)
4-2	Insulation Resistance	Mate connectors, apply 200V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 Method 302 Cond. B)	100MΩ (Min.)
4-3	Dielectric Withstanding Voltage	Mate connectors, apply 500V AC (rms) for 1 minute between adjacent terminal or ground. (Based upon JIS C5402 5.1/MIL-STD-202 Method 301)	No Breakdown.
4-4	Contact Resistance on Crimped Portion	Crimp the applicable wire on to the terminal, measure by dry circuit, 20mV (Max.)., 10mA.	5mΩ (Max.)

5. Mechanical Performance

Test Description		Procedure	Requirement
5-1	Actuator Insertion & Withdrawal Force	Insert and withdraw connectors at the speed rate of 25±3mm / minute.	Refer to paragraph 7
5-2	Crimping Pull Out Force	Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8)	AWG#30	0.8kgf (Min)
			AWG#32	0.5kgf (Min)
			AWG#34	0.3kgf (Min)
5-3	Terminal Insertion Force.	Insert the crimped terminal into the housing.	0.50kgf (Max.)
5-4	Terminal/Housing Retention Force.	Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing.	0.50kgf (Min.)
5-5	Pin Retention Force	Apply axial push force at the speed rate of 25±3mm / minute	0.40kgf (Min.)
5-6	Durability	When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute.	Contact Resistance 80mΩ (Max.)
5-7	Vibration	Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A)	Appearance No Damage. Contact Resistance 80mΩ (Max.) Discontinuity 1 μsec.(Max.)
5-8	Physical Shock	490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A)

6. Environmental Performance And Others

Test Description		Procedure	Requirement
6-1	Temperature Rise	Carrying rated current load.(Based upon UL 498)	30℃(Max.)
6-2	Heat Resistance	85±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A)	Appearance No Damage. Contact Resistance 80mΩ (Max.)
6-3	Cold Resistance	-25±3℃,96 hours (Based upon JIS C0020)	Appearance No Damage. Contact Resistance 80mΩ (Max.)
6-4	Humidity	Temperature: 40±2℃ Relative Humidity : 90~95% Duration: 96 hours (Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B)	Appearance No Damage. Contact Resistance 80mΩ (Max.) Insulation Resistance 10MΩ (Min.) Dielectric Withstanding Voltage Must meet 4-3
6-5	Temperature Cycling	5 cycles of: a) -55℃ 30 minutes b) +85℃ 30 minutes (Based upon JIS C0025)	Appearance No Damage. Contact Resistance 80mΩ (Max.)
6-6	Salt Spray	Tin-plated 12 hours / Gold- plated 24 hours exposure to a salt spray from the 5±1% solution at 35±2℃. (Based upon JIS C0023/MIL-STD-202 Method 101C Cond. B)
6-7	SO2 Gas	24 hours exposure to 50±5ppm. SO2 gas at 40±2℃.
6-8	NH3 Gas	40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.

6-9

Solderability

Soldering Time: 5±0.5 sec.

Solder Temperature: 245±5℃

Solder Wetting 95% of immersed area must show no voids, pin holes

6-10

Resistance to Soldering Heat

When reflowing

Refer to paragraph 8

Solder iron method

Soldering Time: 5±0.5 sec.

Solder Temperature: 370℃ ~ 400℃

Appearance No Damage.

7. Actuator Insertion/Withdrawal Force

[Unit : kgf]

Circuits	At Initial
Circuits	Insertion (Max.)	Withdrawal (Min.)
20	2.60	0.60
30	4.00	0.76

3, Benefits you can get

MOQ: If have stock, according to the smallest package. If not, according to the produce MOQ.

R&D ability:ODM&OEM is avaiable. We also can help you design molds and produce products.

Delivery time:3 to 8 days according to your order amount.

Quality Control: Original connector or replace connector we'll be 100% inspected before dispatching.

Package:PE Bag or Nylon Bag with Carton or according to you

Company Type : Factory and trade integration more than 12-years connector mold design and produce experience.

Hot Products

wire harnesses with 0.8mm pitch compatible SUR connectors IDC cables with hot shrink sleeve

Contact Us

RULETEAM CONNECTION TECHNOLOGY (SHENZHEN) CO.,LTD

1.0mm pitch FI-X gold-flash crimp terminals with phosphor bronze material for AWG30# to 34#

Product Details

Hot Products

wire harnesses with 0.8mm pitch compatible SUR connectors IDC cables with hot shrink sleeve

6.35mm Pitch Compatible Amp 480700 Connector Wire Harnesses Power Cables with AWG26#

ROHS Wire Harnesses for Electronics Device with 3.96mm Pitch VH Connector Compatible JST Connectors

Discrete Wire Harness Assembly 3.0mm Pitch Micro-Fit 3.0 Connector System

customized wire harness with crimp terminal 110 series terminals for automotive device

OEM&ODM Rohs compliant Led light bar cable wire harness with molex connectors