Home Companies RULETEAM CONNECTION TECHNOLOGY (SHENZHEN) CO.,LTD

Signal Connector SSHL Contact, 1.00mm Pitch SSHL Crimp Terminals for AWG#32 To 28 Wires

Contact Us

[China]

Trade Verify

Address: No.A1507H2 Xinhe Century Building, 3069 Caitian Rd, Gangxia Community, Futian District, Shenzhen City, China

Contact name:Ricky Zou

RULETEAM CONNECTION TECHNOLOGY (SHENZHEN) CO.,LTD

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Signal Connector SSHL Contact, 1.00mm Pitch SSHL Crimp Terminals for AWG#32 To 28 Wires

Country/Region	china
City & Province	shenzhen guangdong
Categories	Other Wires, Cables & Cable Assemblies

Product Details

1, The specification of the product including basic size information, electrical and mechanical properties.

Basic size information
Termination Interface Style		crimp or compression
Processing methods		E-stamping before tin-plated or gold-flashed
Insulation O.D.		0.80mm(Max)
Part No.		A1002-TPE/A1002-GPE
Application		signal

Electrical properties
Current Rating		1A AC, DC
Voltage Rating		50V AC, DC
Contact Resistance		30mΩ Max
Insulation Resistance		100mΩ min
Withstanding Voltage		500V AC/minute

Mechanical properties
Temperature range		-25℃ to 85 ℃
Other information please kindly check the following picture.

2, Related drawing and report

Developed for PDP, LCD or small electronics equipment. This is a dual-row small crimp type connector with a secure locking system or without-designed for different applications. The PC board layout is compatible withthat of existing SHD connector, which allows for replacement of the above existing connector. Please kindly check the following information:

5. Mechanical Performance

Test Description		Procedure	Requirement
5-1	Actuator Insertion & Withdrawal Force	Insert and withdraw connectors at the speed rate of 25±3mm / minute.	Refer to paragraph 7
5-2	Crimping Pull Out Force	Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8)	AWG#28	1.0kgf (Min)
			AWG#30	0.8kgf (Min)
			AWG#32	0.5kgf (Min)
5-3	Terminal Insertion Force.	Insert the crimped terminal into the housing.	0.50kgf (Max.)
5-4	Terminal/Housing Retention Force.	Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing.	0.50kgf (Min.)
5-5	Pin Retention Force	Apply axial push force at the speed rate of 25±3mm / minute	0.50kgf (Min.)
5-6	Durability	When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute.	Contact Resistance 40mΩ (Max.)
5-7	Vibration	Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A)	Appearance No Damage. Contact Resistance 40mΩ (Max.) Discontinuity 1 μsec.(Max.)
5-8	Physical Shock	490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A)

6. Environmental Performance And Others

Test Description		Procedure	Requirement
6-1	Temperature Rise	Carrying rated current load.(Based upon UL 498)	30℃(Max.)
6-2	Heat Resistance	85±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A)	Appearance No Damage. Contact Resistance 40mΩ (Max.)
6-3	Cold Resistance	-25±3℃,96 hours (Based upon JIS C0020)	Appearance No Damage. Contact Resistance 40mΩ (Max.)
6-4	Humidity	Temperature: 40±2℃ Relative Humidity : 90~95% Duration: 96 hours (Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B)	Appearance No Damage. Contact Resistance 40mΩ (Max.) Insulation Resistance 10MΩ (Min.) Dielectric Withstanding Voltage Must meet 4-3
6-5	Temperature Cycling	5 cycles of: a) -55℃ 30 minutes b) +85℃ 30 minutes (Based upon JIS C0025)	Appearance No Damage. Contact Resistance 40mΩ (Max.)
6-6	Salt Spray	Tin-plated 12 hours / Gold- plated 24 hours exposure to a salt spray from the 5±1% solution at 35±2℃. (Based upon JIS C0023/MIL-STD-202 Method 101C Cond. B)
6-7	SO2 Gas	24 hours exposure to 50±5ppm. SO2 gas at 40±2℃.
6-8	NH3 Gas	40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.

6-9

Solderability

Soldering Time: 5±0.5 sec.

Solder Temperature: 245±5℃

Solder Wetting 95% of immersed area must show no voids, pin holes

6-10

Resistance to Soldering Heat

When reflowing

Refer to paragraph 8

Solder iron method

Soldering Time: 5±0.5 sec.

Solder Temperature: 370℃ ~ 400℃

Appearance No Damage.

7. Actuator Insertion/Withdrawal Force

[Unit : kgf]

Circuits	At Initial		Circuits	At Initial
Circuits	Insertion (Max.)	Withdrawal (Min.)	Circuits	Insertion (Max.)	Withdrawal (Min.)
Single	0.20	0.03	16	3.60	0.80
02	0.80	0.10	17	3.80	0.85
03	1.00	0.15	18	4.00	0.90
04	1.20	0.20	19	4.20	0.95
05	1.40	0.25	20	4.40	1.00
06	1.60	0.30	21	4.60	1.05
07	1.80	0.35	22	4.80	1.10
08	2.00	0.40	23	5.00	1.15
09	2.20	0.45	24	5.20	1.20
10	2.40	0.50	25	5.40	1.25
11	2.60	0.55	26	5.60	1.30
12	2.80	0.60	27	5.80	1.35
13	3.00	0.65	28	6.00	1.40
14	3.20	0.70	29	6.20	1.45
15	3.40	0.75	30	6.40	1.50

4, FAQ

Q:Do you allow multiple design per setup?
A:Yes.We accept OEM/ODM service and allow multiple design per setup.

Q:How long does shipping take?
A:It depends on the destination location and quantity. In most developed country, delivery by Fed x/UPS/DHL is normally 2-3 days(excluding weekends).

Q: How is the goods packaged ?
A: Usually in PE bads, tube, pipe and with outside carton box.

5, we can offer multiple, safe and fast shippment for you!

We have very good cooperation with world famouse delivery company, and the can offer us good service and favorable price. It's sure that every business between us will be fast and happy. Choose us! Let's connect the realistic and electronic world.

Hot Products

wire harnesses with 0.8mm pitch compatible SUR connectors IDC cables with hot shrink sleeve

Contact Us

RULETEAM CONNECTION TECHNOLOGY (SHENZHEN) CO.,LTD

Signal Connector SSHL Contact, 1.00mm Pitch SSHL Crimp Terminals for AWG#32 To 28 Wires

Product Details

Hot Products

wire harnesses with 0.8mm pitch compatible SUR connectors IDC cables with hot shrink sleeve

6.35mm Pitch Compatible Amp 480700 Connector Wire Harnesses Power Cables with AWG26#

ROHS Wire Harnesses for Electronics Device with 3.96mm Pitch VH Connector Compatible JST Connectors

Discrete Wire Harness Assembly 3.0mm Pitch Micro-Fit 3.0 Connector System

customized wire harness with crimp terminal 110 series terminals for automotive device

OEM&ODM Rohs compliant Led light bar cable wire harness with molex connectors