Active Member
|
[China]
Address: 6-11C Shidai Jingyuan Fuyong Town, Baoan District, Shenzhen City, Guangdong Province, China
Contact name:Sally Mao
Shenzhen Bicheng Electronics Technology Co., Ltd |
|
|
Product profile
1.1 General description
This is a type of aluminum PCB for the application of a filter electric circuit. It's a single
layer MCPCB board at 1.6 mm thick with 2 W/MK thermal conductivity. The aluminum
plate is from ITEQ, Solder mask and silkscreen from Taiyo. It's fabricated per IPC 6012
Class 2 using supplied Gerber data. 25 panels are packed for shipment.
1.2 Features and benifits
A. SMT process.
B. Effective heat dissipation reduces the operating temperature of
the module and
prolongs the service life.
C. Power density and reliability are improved up 10%.
D. Reduce the dependence of heat sinks and other hardware
(including thermal
interface materials),
E. Reduce the volume of the product,
F. Reduce the cost of hardware and assembly,
G. Comprehensive equipment management and maintenance and process
control,
H. Strict WIP inspection and monitoring as well as working
instruction,
I. Whole fabrication process are totally controlled.
J. Delivery on time: >98%
K. Customer complaint rate: <1%
L. No MOQ, low cost for prototypes and samples.
1.3 Application
Commercial lighting, Security system,Rectifier bridge, Outdoor lighting for expressway
1.4 Parameter and data sheet
| PCB SIZE | 105 x 68mm=5PCS |
| BOARD TYPE | IMS PCB |
| Number of Layers | Single sided PCB |
| Surface Mount Components | YES |
| Through Hole Components | NO |
| LAYER STACKUP | copper ------- 35um(1oz) |
| 2.0W/MK dielectric material | |
| Aluminum base 6061 | |
| TECHNOLOGY | |
| Minimum Trace and Space: | 10mil/11.9mil |
| Minimum / Maximum Holes: | no |
| Number of Different Holes: | no |
| Number of Drill Holes: | no |
| Thermal resistance(°C/W) | ≤0.45 |
| Breakdown Voltage(VDC) | 4000 |
| Impedance Control | no |
| BOARD MATERIAL | |
| Thermal conductivity | T-Prepreg 1KA Dielectric |
| Final foil external: | 1oz |
| Final foil internal: | 0oz |
| Final height of PCB: | 1.6mm ±0.16 |
| PLATING AND COATING | |
| Surface Finish | Electroless nickel over Immersion Gold (ENIG)( 1 µ" over 100 µ" nickel) |
| Solder Mask Apply To: | Top. 12µm Minimum. |
| Solder Mask Color: | Black |
| Solder Mask Type: | LPSM |
| CONTOUR/CUTTING | Routing |
| MARKING | |
| Side of Component Legend | no silkscreen |
| Colour of Component Legend | no silkscreen |
| Manufacturer Name or Logo: | as per requirement |
| VIA | no via |
| FLAMIBILITY RATING | UL 94-V0 Approval MIN. |
| DIMENSION TOLERANCE | |
| Outline dimension: | 0.0059" (0.15mm) |
| Board plating: | 0.0030" (0.076mm) |
| Drill tolerance: | 0.002" (0.05mm) |
| TEST | 100% Electrical Test prior shipment |
| APPLICATION: | LED light, Wireless Communication Modem USB Wifi Amplifier GPS Module Bluetooth GPS |
| TYPE OF ARTWORK TO BE SUPPLIED | email file, Gerber RS-274-X, PCBDOC etc |
| SERVICE AREA | Worldwide, Globally. |
The Variety of Aluminum PCBs
Disposal prior to Solder mask
