Active Member
|
[China]
Address: 6-11C Shidai Jingyuan Fuyong Town, Baoan District, Shenzhen City, Guangdong Province, China
Contact name:Sally Mao
Shenzhen Bicheng Electronics Technology Co., Ltd |
|
|
Taconic RF PCB Made on TLF-35 60mil 1.524mm With Immersion Gold for Mixer, Filters and Couplers etc.
(Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference)
TLF-35A is another type of low cost RF material. It's the best choice for low cost, high volume commercial microwave and radio frequency applications. TLF-35A has excellent peel strength for 1/2 ounce and 1 ounce copper (even in comparison to standard epoxy materials), a critical aspect whenever rework is required.
The ultra low moisture absorption rate and low dissipation factor of TLF-35A minimizes phase shift with frequency. TLF-35A is dimensionally stable due to the use of woven fabrics in its design. TLF-35A base materials exhibit flammability of V-0, and are tested in accordance with IPC-TM-650.
TFL-35A has low dielectric constant at 3.5 +/-0.05, low dissipation factor at 0.002.
Benefits:
Low cost
Excellent peel strength
Exceptionally low DF
Low moisture absorption
Very high thermal reliability
Applications:
Filter, coupler, splitter, combiner and mixer
Antenna
High power Amplifier, TMA, TMB, LNA
Repeater
Passive components
Medical scanners
PCB Specifications
| PCB SIZE | 165 x 50mm=1PCS |
| BOARD TYPE | Double sided PCB |
| Number of Layers | 2 layers |
| Surface Mount Components | YES |
| Through Hole Components | NO |
| LAYER STACKUP | copper ------- 35um(1 oz)+plate TOP layer |
| TLF-35 1.524mm | |
| copper ------- 35um(1oz) + plate BOT Layer | |
| TECHNOLOGY | |
| Minimum Trace and Space: | 14 mil / 14 mil |
| Minimum / Maximum Holes: | 0.4mm / 2.5mm |
| Number of Different Holes: | 0 |
| Number of Drill Holes: | 0 |
| Number of Milled Slots: | 0 |
| Number of Internal Cutouts: | 0 |
| Impedance Control: | no |
| Number of Gold finger: | 0 |
| BOARD MATERIAL | |
| Glass Epoxy: | TLF-35 1.524mm |
| Final foil external: | 1.5 oz |
| Final foil internal: | N/A |
| Final height of PCB: | 1.6 mm ±10% |
| PLATING AND COATING | |
| Surface Finish | Immersion gold |
| Solder Mask Apply To: | NO |
| Solder Mask Color: | N/A |
| Solder Mask Type: | N/A |
| CONTOUR/CUTTING | Routing |
| MARKING | |
| Side of Component Legend | N/A |
| Colour of Component Legend | white |
| Manufacturer Name or Logo: | Marked on the board in a conductor and leged FREE AREA |
| VIA | N/A |
| FLAMIBILITY RATING | UL 94-V0 Approval MIN. |
| DIMENSION TOLERANCE | |
| Outline dimension: | 0.0059" |
| Board plating: | 0.0029" |
| Drill tolerance: | 0.002" |
| TEST | 100% Electrical Test prior shipment |
| TYPE OF ARTWORK TO BE SUPPLIED | email file, Gerber RS-274-X, PCBDOC etc |
| SERVICE AREA | Worldwide, Globally. |
Data Sheet of Taconic TLF-35
| TLF-35-xxxx-A TYPICAL VALUES | |||||
| Property | Test Method | Units | Value | Units | Value |
| Dielectric Constant at 1.9GHz | IPC-TM 650 2.5.5.5.1 Mod | 3.50±0.05 | 3.50±0.05 | ||
| Dissipation Factor at 1.9GHz | IPC-TM 650 2.5.5.5.1 Mod | 0.0016 | 0.0016 | ||
| Dissipation Factor at 10GHz | IPC-TM 650 2.5.5.5.1 Mod | 0.0022 | 0.0022 | ||
| Water absorption | IPC-TM 650 2.6.2.1 | % | 0.03 | % | 0.03 |
| Peel Strength(1oz copper) | IPC-TM 650 2.4.8 | Lbs./linear inch | 10 | M/mm | 1.8 |
| Volume Resistivity | IPC-TM 650 2.5.17.1 | Mohm.cm | 2.0 x 109 | Mohm.cm | 2.0 x 109 |
| Surface Resistivity | IPC-TM 650 2.5.17.1 | Mohm | 3.0 x 108 | Mohm | 3.0 x 108 |
| Flexural Strength Lengthwise | IPC-TM 650 2.4.4 | psi | 13,000 | M/mm2 | 90 |
| Flexural Strength Crosswise | IPC-TM 650 2.4.4 | psi | 13,000 | M/mm2 | 90 |
| Thermal Conductivity | IPC-TM 650 2.4.50 | W/m/K | 0.37 | W/m/K | 0.37 |
| x-y CTE(50-150℃) | IPC-TM 650 2.4.41 | ppm/℃ | 9-12 | ppm/℃ | 9-12 |
| z CTE(50-150℃) | IPC-TM 650 2.4.41 | ppm/℃ | 80 | ppm/℃ | 80 |
| Flammability | UL-94 | V-0 | V-0 | ||
