High Frequency PCB | 10 mil RO4350B Circuit Board | Immersion Gold RF PCB

Product profile

1.1 General description

This is a type of double sided PCB built on 10mil RO4350B substrate with Tg 280°C for the application of Mobile Signal Booster. It's 0.3mm thick finished with white silkscreen over green solder mask and immersion gold are plated on pads. The base material is used from Rogers Corp., entire board supplying 1 up per panel. They're fabricated per IPC 6012 Class 2 using supplied Gerber data. Each 100 panels are packed for shipment.

1.2 Features and benefits

A. The dielectric constant (DK) is low and stable, so the signal transmission is good without delay;
B. The characteristic of low dielectric loss makes the signal loss at a lower level, which makes the signal transmission of the whole equipment excellent;
C. Low thermal coefficient of dielectric constant;
D. Low Z-Axis expansion;
E. SMT process is resistant to reflow soldering, resistant to rework;
F. Good oxidation resistance and good heat dissipation;
G. Meeting your PCB needs from prototype to mass production;
H. 16000 square meter workshop;
I. Delivery on time: >98%
J. Customer complaint rate: <1%

1.3 Application

RF transmitter, multi-coupler antenna, RF Identification, trunk amplifier

1.4 Parameter and data sheet

PCB high speed multihead drilling machine