MAX13082ECSA Electronic IC Chips integrated components Transceivers

Stock Offer (Hot Sell)

+5.0V, ±15kV ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers

General Description

The MAX13080E–MAX13089E +5.0V, ±15kV ESD-protected, RS-485/RS-422 transceivers feature one driver and one receiver. These devices include fail-safe circuitry, guaranteeing a logic-high receiver output when receiver inputs are open or shorted. The receiver outputs a logichigh if all transmitters on a terminated bus are disabled (high impedance). The MAX13080E family include a hotswap capability to eliminate false transitions on the bus during power-up or hot insertion.

The MAX13080E/MAX13081E/MAX13082E feature reduced slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, allowing error-free data transmission up to 250kbps. The MAX13083E/MAX13084E also feature slew-rate-limited drivers but allow transmit speeds up to 500kbps. The MAX13086E/MAX13087E/ MAX13088E driver slew rates are not limited, making transmit speeds up to 16Mbps possible. The MAX13089E slew rate is pin selectable for 250kbps, 500kbps, and 16Mbps.

The MAX13082E/MAX13088E are intended for halfduplex communications, and the MAX13080E/ MAX13081E/MAX13083E/MAX13084E/MAX13086E/ MAX13087E are intended for full-duplex communications. The MAX13089E is selectable for half-duplex or full-duplex operation. It also features independently programmable receiver and transmitter output phase through separate pins.

The MAX13080E family transceivers draw 1.2mA of supply current when unloaded or when fully loaded with the drivers disabled. All devices have a 1/8-unit load receiver input impedance, allowing up to 256 transceivers on the bus.

The MAX13080E/MAX13083E/MAX13086E/MAX13089E are available in 14-pin PDIP and 14-pin SO packages. The MAX13081E/MAX13082E/MAX13084E/MAX13087E/ MAX13088E are available in 8-pin PDIP and 8-pin SO packages. The devices operate over the commercial, extended, and automotive temperature ranges.

Applications

• Utility Meters
• Lighting Systems
• Industrial Control
• Telecom
• Security Systems
• Instrumentation
• Profibus

Features

♦ +5.0V Operation

♦ Extended ESD Protection for RS-485/RS-422 I/O Pins ±15kV Human Body Model

♦ True Fail-Safe Receiver While Maintaining EIA/TIA-485 Compatibility

♦ Hot-Swap Input Structures on DE and RE

♦ Enhanced Slew-Rate Limiting Facilitates ErrorFree Data Transmission

   (MAX13080E–MAX13084E/MAX13089E)

♦ Low-Current Shutdown Mode (Except MAX13081E/MAX13084E/MAX13087E)

♦ Pin-Selectable Full-/Half-Duplex Operation (MAX13089E)

♦ Phase Controls to Correct for Twisted-Pair Reversal (MAX13089E)

♦ Allow Up to 256 Transceivers on the Bus

♦ Available in Industry-Standard 8-Pin SO Package

ABSOLUTE MAXIMUM RATINGS

(All Voltages Referenced to GND)

Supply Voltage (V_CC).............................................................+6V

Control Input Voltage (RE, DE, SLR,

   H/F, TXP, RXP)......................................................-0.3V to +6V

Driver Input Voltage (DI)...........................................-0.3V to +6V

Driver Output Voltage (Z, Y, A, B) ............................ -8V to +13V

Receiver Input Voltage (A, B)....................................-8V to +13V

Receiver Input Voltage

   Full Duplex (A, B) ..................................................-8V to +13V

Receiver Output Voltage (RO)....................-0.3V to (VCC + 0.3V)

Driver Output Current .....................................................±250mA

Continuous Power Dissipation (T_A = +70°C)

   8-Pin SO (derate 5.88mW/°C above +70°C) .................471mW

   8-Pin Plastic DIP (derate 9.09mW/°C above +70°C) .....727mW

   14-Pin SO (derate 8.33mW/°C above +70°C) ...............667mW

   14-Pin Plastic DIP (derate 10.0mW/°C above +70°C) ...800mW

Operating Temperature Ranges

   MAX1308_EC_ _ .................................................0°C to +75°C

   MAX1308_EE_ _ ..............................................-40°C to +85°C

   MAX1308_EA_ _ ............................................-40°C to +125°C

Junction Temperature......................................................+150°C

Storage Temperature Range .............................-65°C to +150°C

Lead Temperature (soldering, 10s) .................................+300°C

Soldering Temperature (reflow) .......................................+260°C

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

Pin Configurations and Typical Operating Circuits