RC0603JR-0727RL SMD Resistors 0402 Code High Voltage Smd Code Diode

High Voltage SMD Resistors RC0603JR-0727RL SMD Resistors 0402 Code High Voltage RoHS Compliant

SCOPE

This specification describes RC0603 series chip resistors with lead-free terminations made by thick film process.

APPLICATIONS

z All general purpose application

FEATURES

z Saving of PCB space

z None forbidden-materials used in products/productio

z Halogen Free Epoxy z

RoHS compliant - Products with lead free terminations meet RoHS requirements

- Pb-glass contained in electrodes, resistor element and glass are exempted by RoHS z

Reducing environmentally hazardous wastes

z High component and equipment reliability

ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC

Both part numbers are identified by the series, size, tolerance, packing type, temperature coefficient, taping reel and resistance value.

YAGEO BRAND ordering code GLOBAL PART NUMBER (PREFERRED)

RC0603  X R - XX XXXX L (1) (2) (3) (4) (5) (6)

(1) TOLERANCE

F = ±1% J = ±5% (for Jumper ordering, use code of J)

(2) PACKAGING TYPE R = Paper taping reel

(3) TEMPERATURE COEFFICIENT OF RESISTANCE – = Base on spec

(4) TAPING REEL 07 = 7 inch dia. Reel 10 = 10 inch dia. Reel 13 = 13 inch dia. Reel

(5) RESISTANCE VALUE There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need to mention the last zero after R/K/M, e.g.1K2, not 1K20. Detailed resistance rules show in table of “Resistance rule of global part number”.

ORDERING EXAMPLE

The ordering code of a RC0603 chip resistor, value 56 X with ±1% tolerance, supplied in 7-inch tape reel is: RC06003FR-0711K8L.

NOTE 1. All our RSMD products meet RoHS compliant and Halogen Free. "LFP" of the internal 2D reel label mentions "Lead Free Process"

2. On customized label, "LFP" or specific symbol can be printed

ELECTRICAL CHARACTERISTICS

ELECTRICAL CHARACTERISTICS CHARACTERISTICS

RC0603 1/8 W Operating Temperature Range –55 °C to +155 °C

Maximum Working Voltage          50 V                                            

Maximum Overload Voltage        100 V                                          

Dielectric Withstanding Voltage  100 V                                          

                                     5% (E24) 1 Ω to 22 MΩ

Resistance Range        1% (E24/E96) 1 Ω to 10 MΩ

                                     Zero Ohm Jumper < 0.05 Ω                        

                                              1 Ω ≤ R ≤ 10 Ω ±200 ppm/°C                       

 Temperature Coefficient       10 MΩ < R ≤ 22 MΩ ±200 ppm/°C

                                              10 Ω < R ≤ 10 MΩ ±100 ppm/°C        

Rated Current                        2 A Jumper Criteria

                                              Maximum Current 5 A                         

FOOTPRINT AND SOLDERING PROFILES For recommended footprint and soldering profiles, please see the special data sheet “Chip resistors mounting”.

★ Capacitor/Resistor/Inductance SMD SIZE & PACKAGE ★

HOT OFFER