16 MHz AT86RF212-ZU Electronic IC Chips Fully Integrated Transceiver

AT86RF212

Low Power 800/900 MHz Transceiver for IEEE 802.15.4- 2006, ZigbeeTM , and ISM Applications

Features

• Fully Integrated 800/900 MHz-Band Transceiver

  - European ISM Band from 863 to 870 MHz

  - North American ISM Band from 902 to 928 MHz

• Direct Sequence Spread Spectrum with Different Modulation and Data Rates

  - BPSK with 20 and 40 kbit/s (compliant to IEEE 802.15.4-2006)

  - O-QPSK with 100 and 250 kbit/s (compliant to IEEE 802.15.4-2006)

  - O-QPSK with 200, 400, 500, and 1000 kbit/s PSDU Data Rate

• Flexible Combination of Frequency Bands and Data Rates

• Industry Leading Link Budget

  - Receiver Sensitivity up to -110 dBm

  - Programmable TX Output Power up to +10 dBm

• Low Power Supply Voltage from 1.8 V to 3.6 V

  - Internal Voltage Regulators and Battery Monitor

• Low Current Consumption

  - SLEEP = 0.2 µA

  - TRX_OFF = 0.4 mA

  - RX_ON = 9 mA

  - TX_ACTIVE = 19 mA (at PTX = 5 dBm)

• Digital Interface

  - Registers, Frame Buffer, and AES Accessible through SPI

  - Clock Output with Configurable Rate

• Radio Transceiver Features

  - Adjustable Receiver Sensitivity

  - Integrated TX/RX Switch, LNA, and PLL Loop Filter

  - Fast Settling PLL Supporting Frequency Hopping

  - Automatic VCO and Filter Calibration

  - Integrated 16 MHz Crystal Oscillator

  - 128 byte FIFO for Transmit/Receive

• IEEE 802.15.4-2006 Hardware Support

  - FCS Computation and Check

  - Clear Channel Assessment

  - Received Signal Strength Indicator, Energy Detection, and Link Quality Indication

• MAC Hardware Accelerator

  - Automatic Acknowledgement, CSMA-CA, and Retransmission

  - Automatic Frame Filtering

• AES 128 bit Hardware Accelerator (ECB and CBC modes)

• Extended Feature Set Hardware Support

  - True Random Number Generation for Security Applications

  - TX/RX Indication (External RF Front End Control)

  - MAC based Antenna Diversity

• Optimized for Low BoM Cost and Ease of Production

  - Low External Component Count: Antenna, Reference Crystal, and Bypass Capacitors

  - Excellent ESD Robustness

• Industrial Temperature Range from -40°C to +85°C

• 32-pin Low-profile Lead-free Plastic QFN Package, 5.0 x 5.0 x 0.9 mm3

• Compliant to IEEE 802.15.4-2003 and IEEE 802.15.4-2006, ETSI EN 300 220-1, and FCC 47 CFR Section 15.247

Absolute Maximum Ratings

Note: Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification are not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

Pin Configuration

AT86RF212 Pin-out Diagram

Stock Offer (Hot Sell)