LD1086V33 Transistor to-220 Electronic IC Chip power ic chip IC Electronics

 LD1086V33 Transistor to-3P Electronic
IC Chip power ic chip IC Electronics
1.5A LOW DROP POSITIVE VOLTAGE REGULATOR ADJUSTABLE AND FIXED
 
General Description
 
 The LD1086 is a LOW DROP Voltage Regulator able to provide up to 1.5A of Output Current. Dropout is guaranteed at a maximum of 1.2V at the maximum output current, decreasing at lower loads.
 
The LD1086 is pin to pin compatible with the older 3-terminal adjustable regulators, but has better performances in term of drop and output tolerance. A 2.85V output version is suitable for SCSI-2 active termination. Unlike PNP regulators, where a part of the output current is wasted as quiescent current, the
 
LD1086 quiescent current flows into the load, so increase efficiency. Only a 10µF minimum capacitor is need for stability. The device is supplied in TO-220, D2PAK, D2PAK/A and DPAK. On chip trimming allows the regulator to reach a very tight output voltage tolerance, within ±1% at 25°C.
Features
■ TYPICAL DROPOUT 1.3V AT 1.5A
■ THREE TERMINAL ADJUSTABLE OR FIXED OUTPUT
VOLTAGE 1.5V, 1.8V, 2.5V, 2.85V, 3.3V, 3.6V, 5V, 8V, 9V, 12V.
■ GUARANTEED OUTPUT CURRENT UP TO 1.5A
■ OUPUT TOLERANCE ±1% AT 25°C AND ±2% IN FULL TEMPERATURE RANGE
■ INTERNAL POWER AND THERMAL LIMIT
■ WIDE OPERATING TEMPERATURE RANGE -40°C TO 125°C
■ PACKAGE AVAILABLE: TO-220, D2PAK, D2PAK/A, DPAK
■ PINOUT COMPATIBILITY WITH STANDARD ADJUSTABLE VREG
ABSOLUTE MAXIMUM RATINGS(1)