Home Companies Anterwell Technology Ltd.

regulators are monolithic integrated circuits that provide all the active functions for a step-down switching LM2576T-AD

Anterwell Technology Ltd.
Active Member

Contact Us

[China] country

Address: Room 36B1-B2, Building C, Electronics Science & Technology Building Shennan Mid-Road, Shenzhen China

Contact name:Sharon Yang

Inquir Now

Anterwell Technology Ltd.

regulators are monolithic integrated circuits that provide all the active functions for a step-down switching LM2576T-AD

Country/Region china
City & Province shenzhen guangdong
Categories Switching Power Supply
InquireNow

Product Details

 

LM2576 Series

 

Description

The LM2576 series of regulators are monolithic integrated circuits that provide all the active functions for a step-down (buck) switching regulator, capable of driving 3A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V, 5V, 12V, 15V, and an adjustable output versions. Requiring a minimum number of external components, these regulators are simple to use and include internal frequency compensation and a fixed-frequency oscillator. The LM2576 series offers a high-efficiency replacement for popular three-terminal linear regulators. It substantially reduces the size of the heat sink, and in some cases no heat sink is required. A standard series of inductors optimized for use with the LM2576 are available from several different manufacturers. This feature greatly simplifies the design of switch-mode power supplies. Other features include a guaranteed ± 4% tolerance on output voltage within specified input voltages and output load conditions, and ±10% on the oscillator frequency. External shutdown is included, featuring 50µA (typical) standby current. The output switch includes cycle-by-cycle current limiting, as well as thermal shutdown for full protection under fault conditions.

Note: The LM2576HV is not produced yet.

 

Features

• 3.3V, 5V, 12V, 15V, and adjustable output versions

• Adjustable version output voltage range

• 1.23V to 37V (57V for HV version) ± 4% max over line and load conditions

• Guaranteed 3A output current

• Wide input voltage range, 40V up to 60V for HV version

• Requires only 4 external components

• 52 kHz fixed frequency oscillator

• TTL shutdown capability, low power standby mode

• High efficiency

• Uses readily available standard inductors

• Thermal shutdown and current limit protection

 

Applications

• Simple high-efficiency step-down (buck) regulator

• Efficient pre-regulator for linear regulators

• On-card switching regulators

• Positive to negative converter (Buck-Boost)

 

Typical application Figure 1.(Fixed Output Voltage Versions)

 

Block Diagram

 

Absolute Maximum Ratings

                      Parameter      Maximum       Units

  Maximum Supply Voltage

    LM2576

    LM2576HV

           

           45

           63

         V
  ON/OFF Pin Input Voltage  -0.3V ≤ V ≤ +VIN
  Output Voltage to Ground (Steady State)           -1         V
  Power Dissipation   Internally Limited        W
  Storage Temperature Range   -65 to +150        °C
  Maximum Junction Temperature        150        °C
  Minimum ESD Rating (C= 100pF, R = 1.5 kΩ)          2         kV
  Lead Temperature (Soldering, 10 Seconds)         260        °C

 

Hot Products

Features ■ Proprietary multiplier design for minimum THD ■ Very accurate adjustable output ...
DMOS DRIVER FOR BIPOLAR STEPPER MOTOR ■ OPERATING SUPPLY VOLTAGE FROM 8 TO 52V ■ 2.8A OUTPUT PEAK ...
LM6132 Dual/LM6134 Quad Low Power 10 MHz Rail-to-Rail I/O Operational Amplifiers General Description ...
General Description Connection Diagram The LM2621 is a high efficiency, step-up DC-DC switching ...
FEATURES TYPICAL APPLICATION ■ Low Power: ICC = 300µA Typ ■ Designed for RS485 Interface Application...