+5V RS-232 Transceiver with 0.1uF External Capacitors MAX202CPE

General Description

The MAX200–MAX209/MAX211/MAX213 transceivers are designed for RS-232 and V.28 communication interfaces where Q12V supplies are not available. On-board charge pumps convert the +5V input to the Q10V needed for RS-232 output levels. The MAX201 and MAX209 operate from +5V and +12V, respectively, and contain a +12V to -12V charge-pump voltage converter. The MAX200–MAX209/MAX211/MAX213 drivers and receivers meet all EIA/TIA-232E and CCITT V.28 specifications at a 20kbps data rate. The drivers maintain the Q5V EIA/TIA-232E output signal levels at data rates in excess of 120kbps when loaded in accordance with the EIA/TIA-232E specification. The 5FW shutdown mode of the MAX200, MAX205, MAX206, and MAX211 conserves energy in battery-powered systems. The MAX213 has an active-low shutdown and an active-high receiver enable control. Two receivers of the MAX213 are active, allowing the ring indicator (RI) to be monitored easily using only 75FW power. The MAX211 and MAX213 are available in a 28-pin, wide small-outline (SO) package and a 28-pin shrink smalloutline (SSOP) package, which occupies only 40% of the area of the SO. The MAX207 is now available in a 24-pin SO package and a 24-pin SSOP. The MAX203 and MAX205 use no external components and are recommended for applications with limited circuit board space.

Next-Generation Device Features

For Low-Cost Applications:

MAX221E: ±15kV ESD-Protected, +5V, 1µA,

Single RS-232 Transceiver with AutoShutdown™

 For Low-Voltage and Space-Constrained Applications:

MAX3222E/MAX3232E/MAX3237E/MAX3241E/

MAX3246E: ±15kV ESD-Protected, Down

to 10nA, +3.0V to +5.5V, Up to 1Mbps, True

RS-232 Transceivers (MAX3246E Available in UCSP™ Package)

 For Space-Constrained Applications:

MAX3228E/MAX3229E: ±15kV ESD-Protected,

+2.5V to +5.5V, RS-232 Transceivers in UCSP

 For Low-Voltage or Data Cable Applications:

MAX3380E/MAX3381E:

+2.35V to +5.5V, 1µA, 2Tx/2Rx RS-232

Transceivers with ±15kV ESDProtected I/O and Logic Pins

 For Low-Power Applications:

MAX3224E–MAX3227E/MAX3244E/MAX3245E:

±15kV ESD-Protected, 1µA, 1Mbps, +3.0V to +5.5V,

RS-232 Transceivers with AutoShutdown Plus™