Home Companies Anterwell Technology Ltd.

Fiber Optic Receiving Module Mosfet Power Module TORX173

Anterwell Technology Ltd.
Active Member

Contact Us

[China] country

Address: Room 36B1-B2, Building C, Electronics Science & Technology Building Shennan Mid-Road, Shenzhen China

Contact name:Sharon Yang

Inquir Now

Anterwell Technology Ltd.

Fiber Optic Receiving Module Mosfet Power Module TORX173

Country/Region china
City & Province shenzhen guangdong
InquireNow

Product Details

 

FIBER OPTIC RECEIVING MODULE TORX173

 

FIBER OPTIC RECEIVING MODULE FOR DIGITAL AUDIO EQUIPMENT

  • Conform to JEITA Standard CP−1201 (For Digital Audio Interfaces including Fiber Optic inter−connections).
  • TTL Interface
  • ATC (Automatic Threshold Control) Circuit is used for stabilized output at a wide range of optical power level. 1

Unit: mm

 

1. Maximum Ratings (Ta = 25°C)

          Characteristics         Symbol             Rating         Unit
   Storage Temperature          Tstg          −40 to 70           °C
   Operating Temperature          Topr          −20 to 70           °C
   Supply Voltage          VCC          −0.5 to 7            V
   Low Level Output Current          IOL                20           mA
   High Level Output Current          IOH                −1           mA
   Soldering Temperature          Tsol             260 (Note 1)            °C

Note 1: Soldering time ≤ 10 s (More than 1 mm apart from the package).

 

2. Recommended Operating Conditions

     Characteristics       Symbol          Min.      Typ.      Max.     Unit
  Supply Voltage        VCC        4.75       5.0      5.25       V
  High Level Output Current         IOH         --       --     −150       µA
  Low Level Output Current         IOL         --       --      1.6       mA

 

3. Electrical and Optical Characteristics (Ta = 25°C, VCC = 5 V)

        Characteristics   Symbol   Test Condition   Min   Typ.   Max   Unit
   Data Rate  NRZ code                       (Note 2)    DC   --   6  Mb / s
  Transmission Distance  TOTX173 Using APF     (Note 3)    0.2   --   10   m
 Pulse Width Distortion  (Note 4)    ∆tw

 Pulse width 165 ns

 Pulse cycle 330 ns, CL = 10 pF  Using TOTX173

    −20   --   20   ns
 Maximum Receivable Power                                              (Note 5)    PMAX 6 Mb / s, Using APF  −14.5   --   --   dBm
 Minimum Receivable Power                                              (Note 5)    PMIN 6 Mb / s, Using APF   --   --   -27   dBm
  Rise Time      tr CL = 10 pF   --   10   30   ns
  Fall Time      tf CL = 10 pF   --   5   30   ns
  Current Consumption     ICC    --   22   40   mA
  High Level Output Voltage     VOH    2.7   --   --   V
  Low Level Output Voltage     VOL    --   --   0.4   V

Note 2: For data rate > 3 Mb / s, the duty factor must be such as kept 25 to 75%.

           High level output when optical flux is received. Low level output when optical flux is not received. 

Note 3: All Plastic Fiber (970 / 1000 µm).

Note 4: Between input of a fiber optic transmitting module and output of TORX173. Note 5: BER ≤ 10−9 , rated by                                 peak value.

 

4. Example of Typical Characteristics (Note 6)

Note 6: There give characteristic examples, and its values are not guaranteed.

 

5. Application Circuit

6.  Applicable optical fiber with fiber optic connectors.

TOCP172−□□B

Hot Products

TL7702A, TL7705A, TL7709A, TL7712A, TL7715A SUPPLY-VOLTAGE SUPERVISORS Power-On Reset Generator ...
TUSB3410 USB TO SERIAL PORT CONTROLLER 1.Controller Description The TUSB3410 provides bridging ...
256 x 256 DIGITAL SWITCHING MATRIX M3488B1 . 256 INPUT AND 256 OUTPUT CHANNEL CMOS DIGITAL SWITCHING ...
LF147/LF347 Wide Bandwidth Quad JFET Input Operational Amplifiers General Description The LF147 is a ...
FEATURES • Output capability: standard • ICC category: flip-flop GENERAL DESCRIPTION The 74HC/HCT107 ...
Features „ ♦ARM7TDMI-S processor, running at up to 72 MHz. „ ♦Up to 512 kB on-chip Flash Program ...